DvbKazi
I want to build a system that scramble and descramble tv channels on DVB. More details will be shared on chat. Please only bid if you are expert in building game emulator.
I have a pre installed tvheadend on an iptv streamer, with a dvb-s2 tuner. I require someone to setup all muxes for nilesat and hotbird
I want to build a system that scramble and descramble tv channels on dvb
Writing simulcrypt dvb encryption with Card programming include CA decode for DVB receivers , similar to conax ca
Writing simulcrypt dvb encryption with Card programming include CA decode for DVB receivers , similar to conax ca
writing simulcrypt dvb encryption with Card programming include CA decode for DVB recivers , similar with conax ca please show me your similar past project to save the time.
I need DVB-DSNG signal example. If you have DVB Modulator with DVB-DSNG mode support (EN 301 210 standard) and you can capture RF signal with high-speed digitizer (or SDR/USRP device), I'm ready to buy it. I need 1e7..1e8 samples record for each modulation type. In total 5 records for (1) 8PSK 2/3 (2) 8PSK 5/6 (3) 8PSK 8/9 (4) 16QAM 3/4 (5) 16QAM 7/8 DVB data content is not important, PRBS is OK. Symbol rate and carrier frequency are also not important. Captrured signal must be at least with 2 samples per symbol sampling rate. Please send me info about your equipment and your price for that work. Thank you!
Tafadhali Jisajili ama Ingia ili kuona maelezo.
-the dvb-t and dvb-t2 standards will be analyzed from the point of view of the transmitted signals and the physical level in general -MATLAB modules will be developed to allow the generation of OFDM signals compatible with these standards
I need you to develop some software for me. I would like this software to be developed. to work in Satellite TV box based on Enigma2. E2. the box is Linux Based and I have heard that the plugin for such box is made of Python.
need some developments about BISS-E box. the box will be an Satellite DVB-S2 receiver
Project Description: Hi, i'm looking for a freelancer having experience with Astra Cesbo, ffmpeg, DVB-C PCIe cards for an IPTV Project. 1. Install of Astra and config 2. Transcode DVB-C stream into h264 using ffmpeg. Target: 1 Mbps stream udp 3. Clear documentation Please contact me for questions Thanks
...+ for allowed channels + Subscriber Information + Basic Information for video watching + More Information for personal data OS ** + Linux (+ Windows) Supported Input devices or protocols: ************************************* + DVB Streamer like IPS-01 + DVB Software Streamer like dvblast + Encoder Device like AVN200 Encoder, CBS-D-E1_HD MPEG4/H.264 Encoder + Software Encoder like VLC + Hybrid Satellite Receiver like Dreambox, Vu Ultimo + Digital / Analog PCI Device like Conexant 2388x Analog PCI card, Technotrend DVB PCI card + RTMP Protocol + RTSP Protocol + HTTP Protocol + UDP Protocol + RTP Protocol Supported Players: ****************** + Apple HTTP Live Streaming (HLS) + HTML5 Video Streaming + RTSP/RTMP/RTP + Multicas...
...+ for allowed channels + Subscriber Information + Basic Information for video watching + More Information for personal data OS ** + Linux (+ Windows) Supported Input devices or protocols: ************************************* + DVB Streamer like IPS-01 + DVB Software Streamer like dvblast + Encoder Device like AVN200 Encoder, CBS-D-E1_HD MPEG4/H.264 Encoder + Software Encoder like VLC + Hybrid Satellite Receiver like Dreambox, Vu Ultimo + Digital / Analog PCI Device like Conexant 2388x Analog PCI card, Technotrend DVB PCI card + RTMP Protocol + RTSP Protocol + HTTP Protocol + UDP Protocol + RTP Protocol Supported Players: ****************** + Apple HTTP Live Streaming (HLS) + HTML5 Video Streaming + RTSP/RTMP/RTP + Multicas...
I need for someone to configure CherryEPG on my Linux Ubuntu VM to stream to my DVB MPEG-2 Multiplexer so that i can display on my EIT tables to a DVB Cable Box. In the end i should be able to insert updated programs of upcoming events automatically on the EPG. I have already installed the CherryEPG software on Ubuntu, I need it to be configured to link to my Multiplexer and display the EPG on my system.
Company logo should be rectangular and bilingual In Georgian and English languages. also associated to telecommunications. Company Name in English: TV Sarpi Company Name in Georgian: ტვ სარფი Company activities: Telecommunications, Cable TV, CATV - DVB-T - OTT - IPTV The Company logo should be in 2D vector format. Can be used abstractions Logo for website - PNG format Dimensions: 197x47
...+ for allowed channels + Subscriber Information + Basic Information for video watching + More Information for personal data OS ** + Linux (+ Windows) Supported Input devices or protocols: ************************************* + DVB Streamer like IPS-01 + DVB Software Streamer like dvblast + Encoder Device like AVN200 Encoder, CBS-D-E1_HD MPEG4/H.264 Encoder + Software Encoder like VLC + Hybrid Satellite Receiver like Dreambox, Vu Ultimo + Digital / Analog PCI Device like Conexant 2388x Analog PCI card, Technotrend DVB PCI card + RTMP Protocol + RTSP Protocol + HTTP Protocol + UDP Protocol + RTP Protocol Supported Players: ****************** + Apple HTTP Live Streaming (HLS) + HTML5 Video Streaming + RTSP/RTMP/RTP + Multicas...
need someone coding DVB-T modulator SDK from Hides Taiwan model UT-100C and PT-100 you can look SDK source from base on Linux config via WEB UI
Live Stream (TS) handling for TV Head Station. using prof. DVB-S Decoder with multi Transponder
soft de-mapping for 16QAM in DVB-T2 receiver
Hi, I am having a DVB-T Stick and I have already recorded a pir signal, and I could see it great! Now I changed some settings and there is a lot of noise, so I can't record the signal. Can anybody help me to get the correct settings again?
If you know to type in shridhar font then only you can bid otherwise plz don't bid here. I am attaching an image and shridhar font installer plz give me the sample in shridhar font and I will offer you my project. It is a long term project so plz don't bid if you don't know about shridhar font.
• Conocimiento profundo de las soluciones de servicios de video e Internet: HTTP, HLS, HDS, Smooth Streaming, MPEG DASH, RTMP, RTSP, RTMPE. • Conocimiento profundo de soluciones de IPTV y servicios de multidifusión como OPCH, DVB-IPI y FCC / RET. Building Blocks de arquitectura
Hi, I have TVHeadend and some of my DVB receivers go standby after 24 or 48 hour and each time I have to manually wake-up them. I need a solution such that sense hdmi output and when hdmi signal goes off it send wake-up signal. Can you help me about that problem? Best Regards
I want to implement the encoder and decoder of spatially coupled ldpc codes for DVB-S2 and campare the BER of SC-LDPC with the other standards LDPC codes
troubleshooting TVheadend with Avermedia PCIe Card. DVB-S please only bid if you really know TVHeadend
Looking to Implement web-site parser for lyngsat.com. It should parse and store satellites, transponders, programs/channels, logos entities into local database Linux Dvb-s2 . Requirements: Implement with Python 2.7, Scrapy, daemonize with ScrapyD Scrap and its subprojects if needed (,,) Scrap all the entities/attributes/relationships described in data model (see attached) Ability to run in incremental update mode. With every new run to update existing database with newly scrapped data Configuration with yml file (see attached) Extensive console and file logging on all stages of scrapping on different log levels Clean structured readable source code with basic documentation Step-by-step deployment
Live Stream (TS) decrypting for TV Head Station. using prof. DVB-S Decoder with multi Transponder, without CI-Cam
Iptv Netzwerk ayarları, işten anlıyan dvb-c dvbs2 , linux, 'la servetlerin kurulumu, güvenlik sytemin yapılması gibi işler.
hye We would be interested in a tool that makes RTMP to UDP multicast and preferrable also Mpeg Dash to UDP multicast
writing simulcrypt dvb encription with Card programming include CA decode for DVB recivers , please show me your similar past project to save the time.
...+ for allowed channels + Subscriber Information + Basic Information for video watching + More Information for personal data OS ** + Linux (+ Windows) Supported Input devices or protocols: ************************************* + DVB Streamer like IPS-01 + DVB Software Streamer like dvblast + Encoder Device like AVN200 Encoder, CBS-D-E1_HD MPEG4/H.264 Encoder + Software Encoder like VLC + Hybrid Satellite Receiver like Dreambox, Vu Ultimo + Digital / Analog PCI Device like Conexant 2388x Analog PCI card, Technotrend DVB PCI card + RTMP Protocol + RTSP Protocol + HTTP Protocol + UDP Protocol + RTP Protocol Supported Players: ****************** + Apple HTTP Live Streaming (HLS) + HTML5 Video Streaming + RTSP/RTMP/RTP + Multicas...
Project Description: Hi, i'm looking for a freelancer having experience with astra, xtream-codes, Mumudvb, ffmpeg, DVB-S2, dvb-c TBS boards ! PCIe cards for an IPTV Project. 1. Select proper Linux Disitribution (i already use ubuntu 14.05) 2. Select hardware ( i have xeon 16 processors and other computers like this.) in order to maximise number of simulatinous transcoding jobs 2. Installation of driver + application software for DVB-S2 PCIe card, dvb-c 3. i already have license of astra configured and i just want help to config ffmpeg to stream it to xtream panel or udp multicast local. 4. Transcode DVB-S2 dvb-c stream into h264 using ffmpeg. Target: 2 or 3 Mbps stream udp 5. Clear documentation Please contact me for questions T...
Hello, I have a linux ubuntu server with skystar 2 dvb card but soon I'll be getting a TBS octa-tuner card and I need someone to get everything working. I've bought cardsharing need someone to get it to work with Oscam and mumudvb so it can descramble all the channels.
...So, the new project for you will be modify the "libavformat mpegtsenc" source code in order to solve two problems: 1. Improve the MPEGTS encoder code because the original ffmpeg code has a bad compatibility with hardware mpegts decoders. You can get help with this task, reading something about the ffmpeg MPEGTS encoding problem in this thread: Also, you can check the Opencaster source code in order to help you as guide for know how re-code the original livabformat MPEGTS encoder source code, reading this site: 2. Add a new ffmpeg feature in order we can use a command line option for setting an external URL pointing to a
...streams. So, the new project for you will be modify the "libavformat mpegtsenc" source code in order to solve two problems: 1. Improve the MPEGTS encoder code because the original ffmpeg code has a bad compatibility with hardware mpegts decoders. You can get help with this task, reading something about the ffmpeg MPEGTS encoding problem in this thread: Also, you can check the Opencaster source code in order to help you as guide for know how re-code the original livabformat MPEGTS encoder source code, reading this site: 2. Add a new ffmpeg feature in order we can use a command line option for setting an external URL pointing to a dynamic
Looking for an experienced programmer to write a windows based client software able to stream to different IPs only the audio captured from DVB-S2 and DVB-T tuner cards. For example: TBS6909 - this pci express interface is cabable of receiving SD/HD digital TV channels from 8 different satellite transponders simultaneously. With this software we need to: - scan all the frequencies available for each transponders (we can also use more cards on the same PC) - select for each frequency the channels we would like to use - create for each channels one or more URL (the IP addresses which contain the channel name - for example: ) - set the streaming audio quality (it should be at least 64kbps) The main function: - save settings - autorestart on crashes
We are looking for a professional solution for IPTV/DVB-C headend transcoding system that uses GPU performacne to transcode video. Running on linux based machiine. Requirements: Input and Output is UDP multicast that must be in DVB Standards. Static MUXing is needed. VRB and CBR with absolute minimal floating bandwidth! Also MPTS Static muxing. Video and audio source selection from MPTS. Transcoded services output as MPTS with max mux bandwidth. Multiple audio streams and EPG passthrough. Multiple channel transcoding in same HW. Support NVIDIA QUADRO QPU for video transcoding acceleration. Autorestart transcoding if failure. (watch dog). Minimize CPU usage Maximize GPU usage. Must contains as much configuralble functions as it is possible (for eg buffe...
We have an ubuntu desktop where we have installed TV headend, we have 3 DAB-FM-DVB-T pins that we want set up to work and we can record them. You must therefore stand for the complete setup so it works and we can record via the TV headend. The work must be done via teamviewer as ubuntu desktop does not have a statik IP Budget max 70 dollar
Hello, we want to update our Ebay Store Front Design. Currently it looks like this: We already have a template for the product listings, which looks like this: You can get this as a basement for the storefront template, because the header, footer and crosselling section already exist. Basically there are three things which have to be implemented: 1) The search field, which should be located in a transparent layer on top of the header image. 2) The four boxes for Categories underneath the big header image. They should also work on mobile devices of course. The grey text in transparent
We have an ubuntu desktop where we have installed TV headend, we have 3 DAB-FM-DVB-T pins that we want set up to work and we can record them. You must therefore stand for the complete setup so it works and we can record via the TV headend. The work must be done via teamviewer as ubuntu desktop does not have a statik IP Budget max 70 dollar
I need to set up a machine CentOS 7 with satellite reception TBSDTV DVB-S2 cards so the channels exit RTMP format with DVBlast preferably. We need frontend Web GUI, not just command line.
Read carefully, answer the questions! I have almost completed project by my previous developer. EPG feature and in-app purchases feature remains. I am going to finish the project by end of thi...carefully, answer the questions! I have almost completed project by my previous developer. EPG feature and in-app purchases feature remains. I am going to finish the project by end of this month. Looking for the right guy to complete the project. Regards! 1. What is EPG? 2. How to integrate EPG plugin to my app? 3. How to integrate in-app purchase feature to my app? 4. You will use DVB or XMLTV? 5. Why I have to choose you? 6. Describe what you know about the IPTV application, streaming services for that, EPG, in-app purchase. 7. How long days will you need for this jo...
i use cesbo to stream DVB Streams to myxtream codes panel. I transcode via pipe with ffmpeg. In some cases is the sound missing and video is runnig or video is running and sound is missin. I need a solution/code to detect the "error" restart the FFPMEG pipe.
I need a offline converter to convert fonts. Actually we got the excel file for our reports and two three columns in that file contains some text which uses "DVB-TTSurekhEN" Font and we want to convert that text into Hindi Unicode Fonts and English. Basically I need a software which can took that file as an input, convert those 2-3 columns to readable Hindi or English format which ever we choose and it will generate a new output file. I will provide you the demo raw file and I need this converter in C#. One important thing we need source code for that software too. PM me for more details.
I have some documents that are typed with ISM font. Need to copy and paste that content on Wordpress page. Right now when I copy that content to wordpress page, It is giving some gibberish looking text . Need help to fix this. Font of the document is DVB-TTSurekh. Will need to start this ASAP.
I need you to develop some software for me. I would like this software to be developed for Windows using C or C++. I am trying to make an energy detection model for spectrum sensing of DVB T2 2k mode signals and implement it on FPGA board. So I have made my energy detection model but cannot find solutions for DVB T2 signal generation and pass it through my energy detection model . Can I get some help. ?
There are two hosts for transcoding each with dvb-s card, and one host for streaming. I want to use tvheadend for encoding, ffmpeg to transcoding, nginx for streaming. Each host is connected to multiple sat positions via multiswitch. The task is to create exactly this rule/logic script: 1. user connects to streamer ( standalone host) and request for channel 2. streamer script checks if the channels can stream from some sat transponder (already locked) 3. If yes - take from this tuner, if not - lock some free tuner which is not locked (via tvheadend api) 4. run ffmpeg on this channel and push to streamer-> to client Please only experienced users who know exactly what is this task about, have experience with tvheadend, nginx and ffmpeg. Please save my and your time. thank you
There are two hosts for transcoding each with dvb-s card, and one host for streaming. I want to use tvheadend for encoding, ffmpeg to transcoding, nginx for streaming. Each host is connected to multiple sat positions via multiswitch. The task is to create exactly this rule/logic script: 1. user connects to streamer ( standalone host) and request for channel 2. streamer script checks if the channels can stream from some sat transponder (already locked) 3. If yes - take from this tuner, if not - lock some free tuner which is not locked (via tvheadend api) 4. run ffmpeg on this channel and push to streamer-> to client Please only experienced users who know exactly what is this task about, have experience with tvheadend, nginx and ffmpeg. Please save my and your time. thank you
Hi I need a Web GUI (based on a good open Source PHP Framework) for DVBlast Install Script: ****************** + Need a Linux Install Shell Script for diffrent Linux Distributions to install the needed Sources with one Command ! (DVBlast & minisapserver & WebServer & PHP & SQL and so one) + DVBlast: User need can be select configure options of DVBlast during the installtion process. ...latest release. - Please see attached detailed instructions. There is NO transcoding to be done, the UDP streams are to be used in LAN environment. However I may wish to add transcoding at a later date, this will be as an additional project. I have a Moi Pro AMD with DVBS and DVBT tuners for testing. Please only apply if you fully understand DVB