Port bluetooth delphiKazi

...860-960 MHz Active Digital always on antenna. It will support any RFID tags of the stated frequency range and the protocol. We have identified some possible technologies below but will rely on your expertise to pick one or combination of these or another suitable one from your experience. If you know of a pre-built solution that will be ideal. This antenna will be connected to our MCU via a comm port and be fully software defined. Our objective is to accomplish a 0.3 meters x,y,z 3D planer precision location of RFID UHF passive tags at about 25 meter cone at about 8 meters height from floor. Must be RFID UHF Frequency range (roughly 860-960 MHz, supporting US, Europe, Asia spectrums) Applicable ISO standards like EPCglobal UHF RFID Class 1 Gen2/ISO 18000-63/6C. This may be alw...

...wearable device. The system should feature Bluetooth, Wifi, and LTE capabilities that will include implementation of new characteristics/features through these wireless technologies as well as battery optimization of the device Key Requirements: - The firmware should support Bluetooth, Wifi, and LTE technology for seamless communication with our broker and other devices. - The device is intended for wearable use, so the firmware should be optimized for this purpose. - The code should be efficient and lightweight, considering the limited resources of a wearable device. - A good understanding of Bluetooth technology, particularly in the context of embedded systems, is crucial. Ideal Candidate: - Proven experience in developing embedded firmware with Bluetooth...

Having problems with Docker and need configurations 1 - 3 current running containers need prop...Requirements: - Configure 3 isolated Docker groups for Entity A, Entity B, and Entity C isolated from each other. - The setup should be designed for scalability, load balancing, and security although specific requirements for each are not yet defined Ideal Freelancer: - Proven experience in Docker containerization - Familiarity with setting up and managing production environments - Strong understanding of port assignment and management - Capability for creating isolated environments for different entities - Paying $10 for the project. - All work done via AnyDesk, no SSH. Please feel free to reach out to clarify any requirements or suggest any additional best practices for our Doc...

I've Dockerised my Spring Boot application, but despite trying to access it through localhost:8080, I'm facing difficulties. - **Problem Statement**: - Th...application, but despite trying to access it through localhost:8080, I'm facing difficulties. - **Problem Statement**: - The Spring Boot application is not accessible via the specified port. - **Requirements**: - Resolve the issue causing the application to be inaccessible. - Verify the Docker setup, ensuring the Spring Boot application is Dockerised correctly. - Provide a solution so that the application can be accessed through localhost:8080. Ideal Skills & Experience: - Proficiency in Spring Boot & Docker. - Strong knowledge of networking concepts. - Previous experience in debugging ...

...representation of their progress in the form of charts or graphs. Additional Features: - Alcohol Test Device Connection: Ability to connect with an alcohol test device through Bluetooth for added accountability. - Alcohol test result history management - Competition Rank Board: A competitive element where users can see how they rank against others in their sobriety journey. We need to refer to and we add some community function in the app. Ideal Skills: - Proficient in app development for both iOS and Android platforms - Experience in creating social networking or motivational apps - Ability to integrate Bluetooth functionality - Strong UI/UX design skills - Previous experience developing sobriety or health-related applications If you're a passionate developer w...

...HARDWARE DESIGN Both to be delivered by the same developer. I'm seeking a proficient electronics engineer and app developer to create a PCB, software, and implement an app for a Bluetooth locator, like a simple key finder. There are many products like this already on the market at very low prices. PCB must be small, alarm very loud and power consumption low. Bluetooth should automatically connect to the phone. PCB should power on when movement is detected and remain on for a period of time, set within the app. A tilt/vibration sensor detects when the PCB moves and turns on the power. Key features of the Bluetooth device must include: - Alarm sound feature - press button on phone to sound a loud alarm on PCB - Flashing light feature - light flashes when alar...

I'm in need of a proficient Power BI developer with a keen understanding of data modeling and transformation for the purpose of creating an intuitive dashboard. This dashboard will primarily focus on showcasing our sales and market data. Most of the data would be related to Transportation and Logistics Domain, for eg : Port Wise Performance Customer Support Analysis Database would be PostgreSQL Key Components: - Incorporation of various visuals such as line and bar graphs, pie and doughnut charts and maps to effectively represent geographical data. - Advanced skills in handling complex sales and market data, and ability to visualize this in a digestible manner are essential for this task. - Familiarity with creating reporting tools using similar datasets will be highly appre...

I am looking for an experienced mobile app developer to create a mobile app for IOS and Android devices. Mobile application to manage two devices: The objective is to develop an application to manage two devices via WiFi (can be expanded in the future). We have two devices: sauna and red light therapy panel. They all have a touch control panel and can connect to your mobile phone via Bluetooth and Wi-Fi. Many of the providers even offer you the mobile application already developed (as you can see in the video of the red light panel) but only for each product category. The idea is to make a similar application from which the two devices can be managed (time programming, lighting, power, etc.). And the history of uses/configurations is saved. Please clarify in the response to this...

...looking for a seasoned mobile app developer to create a mobile application for both IOS and Android devices. Mobile application to manage two devices: The objective is to develop an application to manage two devices via WiFi (can be expanded in the future). We have two devices: sauna and red light therapy panel. They all have a touch control panel and can connect to your mobile phone via Bluetooth and Wi-Fi. Many of the providers even offer you the mobile application already developed (as you can see in the video of the red light panel) but only for each product category. The idea is to make a similar application from which the two devices can be managed (time programming, lighting, power, etc.). And the history of uses/configurations is saved. Please clarify in the response...

Fixed cost & developers from Uttar Pradesh only . I'm looking for a skilled freelancer who can help me develop a real-time temperature display system using NodeMCU ESP8266. Key Project Requirements: - Integration with 3 or more Bluetooth BLE sensors - Real-time temperature display on an LCD screen - Parsing advertisement data from nearby paired BLE sensors - Data sheet will be supplied for reference Ideal Skills/Experiences: - Proficient in programming with NodeMCU ESP8266 - Experienced in working with Bluetooth Low Energy (BLE) technology - Familiarity with parsing advertisement data - Knowledge of connecting and operating LCD displays This is a fixed cost project with a budget under $100. Please provide your quote for the project, along with your relevant exp...

I am currently in need of an experienced photo editor to urgently perform a range of edits on my pictures. Specifically, I require: - remove the middle metal part from the port as good as possible. My preferred format for these edited photos is JPG. Given the urgency of my requirements, I need these edits completed as soon as possible. If you possess these skills and can deliver high-quality work quickly, I would love to hear from you.

...Prevent thieves from shutting down the mobile phone: This is a critical security feature we are incorporating into the app. We need to make sure that the app is robust and capable of preventing unauthorized shutdowns of the device. - Provide customers with quick settings: The app should also have a user-friendly, accessible quick settings menu. This should include battery status, Wi-Fi settings, Bluetooth settings - essentially, everything that can be considered essential for quick and easy access. Ideal skills and experience for this job include: - Proficiency in Android app development - Experience with anti-theft features in apps - Strong UI/UX design skills - Knowledge of mobile device security best practices - Ability to create a user-friendly quick settings menu The proje...

We need support with HUAWEI S5731-h48T switches. Specifically, starting from a reset switch, we need to understand: A brief, concise introduction on how the configuration works in general. How to enable SSH connection on all switch ports: 2.a. How to change the default port for SSH connection. How to enable the WEB interface on all available Ethernet ports. How to set ports to TAG mode, both via command line and WEB interface. How to set ports to UNTAG mode, both via command line and WEB interface. How to export and reload the configuration. DETAILS: The support operation must be performed via TEAMVIEWER connection to a laptop that is connected via SERIAL to the reset switch. At the end of the work, we need specific commands along with comments and best practices. Upon co...

I have a desktop application made using Electron software for electrochemistry experiments and I'm looking for a skilled front-end developer to help with software packaging and COM port detection. Ideal Skills and Experience: - Expertise in Front-End Development, specifically with Javascript and HTML - Experience with Electron software - Prior experience with arduino and python, a bonus - Strong understanding of software packaging in Electron applications The application should be compatible with Windows operating system. I need help fixing certain issues like the selecting the COM Port, the functionality needs to be re-written so that it is performed by Electron's WebAPI rather than Python(current). The start-up image must be the company logo. I need help in ...

I'm seeking a skilled professional to design and build an AIS 140 standard GPS device with a primary focus on fleet manageme...monitoring: It should be equipped with technology to monitor fuel levels in real-time, allowing for efficient fuel management. The device should support the following communication interfaces: - 4G/LTE: To ensure stable and fast connection for data transfer. - Bluetooth: To allow for wireless communication with other devices when needed. The ideal candidate for this project should have experience in: - GPS device development - Fleet management systems - Embedded systems - Communication protocols, particularly 4G/LTE and Bluetooth. Do you have what it takes to deliver the most efficient and reliable fleet management GPS device? Then, you'...

I'm looking for a seasoned Android developer (kotlin /Java) who can create an MDM app (Device owner mode) , which acts as DPC (De...who can create an MDM app (Device owner mode) , which acts as DPC (Device Policy Controller) with a solid user management core functionality. Your key tasks will be: Creating an Android application which - manages the device hardware and software - this app would be able to configure network parameters, VPN, and CA certificates - wipe the device and its contents - set global settings like GPS, Bluetooth, Airplane mode. - Configure password policy and user accounts on device Relevant experience in the same field is imperative. Strong knowledge of Android development, DPC, Android enterprise, MDM, UEM, EMM, etc is required. I want to get trained o...

hello, there, We need some Native Austrian and German to do a recording task, they are short sentences, the recording would take you about 15 minutes, the budget is $9 for the w...be: -Age from 18-55, Both professional voiceover or amateur -Equipment: You just need to have a good phone. The recording script is in our recording app so you will need to download our recording app and then use task name we provide to log in and record. -Envrionment: Please record in a quiet room, no echo, no other noise like birds noise, car noise and so on. Don't need to use earphone or bluetooth. -Pronunciaiton: we will provide a few sample audios for you to check the pronunciation we need, you need to listen them first before starting the recording task If you are interested in it, please con...

Looking for short and long term help on an canbus tool using ESP32. Proficiency in C/C++ programming for embedded systems. Understanding of CAN bus communication protocols Experience with ESP-IDF Familiarity with hardware design and debugging tools. Knowledge of network protocols and interfacin...embedded systems. Understanding of CAN bus communication protocols Experience with ESP-IDF Familiarity with hardware design and debugging tools. Knowledge of network protocols and interfacing (UART, SPI, I2C, etc.). Experience with other microcontroller platforms and RTOS Familiarity with automotive diagnostic standards (e.g., OBD-II, UDS) Knowledge of wireless communication protocols (Wi-Fi, Bluetooth) as used in ESP32 Experience with cross-platform development for desktop and mobile ap...

...necessary for easy operation. Think about intuitive design and clear displays. - **Bluetooth Connectivity**: The app must be able to connect seamlessly to the ESP32 via Bluetooth. Reliable connectivity is a must. Interactions: - **Button presses**: The app will have buttons for the user to send commands to the ESP32. These should be responsive and intuitive. - **Text commands**: The user should also have the ability to input text commands. Think about a text box or prompt for this. - **Slider controls**: Some controls should be in the form of sliders. Ensure these are easy to use and understand. Ideal candidate would have experience and expertise in: - Android App Development - Understanding of Bluetooth communication - Data Visualization - User Interface Design...

I have a SQL Server that needs to be accessible over the internet. However, I'm facing connectivity issues, possibly due to closed or blocked ports on my ComCast router model CBR2-T. I need a freelancer to open the necessary ports on the router. The task involves: - Checking the current port status on the router - Identifying the SQL Server port - Opening the port on the router Please bid if you're experienced with network configuration and have dealt with ComCast routers before. Necessary Skills: - Network Configuration - Router Administration - ComCast Router Experience - SQL Server Configuration

I'm looking for a talented illustrator to create visuals for my innovative smar...Tracking Camera Focus: A close-up image showcasing two discreet cameras positioned near the headband, facing inwards towards the eyes. Label them as "Eye Tracking Cameras." Technical Breakdown (Optional): An illustration depicting the internal components, including a central processing chip connected to sections labeled "Noise Cancellation Algorithms," "Speech Processing," and "Eye Tracking." Show Bluetooth connectivity. Portability Image: An image demonstrating the headphones' portability. It could show someone placing them in a sleek carrying case that fits easily into a bag. Style and Tone: A professional, modern, and user-friendly visual style is p...

I'm seeking a Macrodroid expert to handle two key tasks: - Automating the opening and closing of certain apps on my Android device. - Automating specific device settings, such as WiFi and Bluetooth toggling, and screen brightness adjustment. The project has a high priority, so I need someone who can start immediately. The ideal freelancer should be well-versed with Macrodroid, particularly in creating complex automation sequences, and be experienced in Android device settings customization.

I'm in need of a skilled Delphi developer, well-versed with Delphi 5, to work on an existing software project. The goal is to both fix bugs and enhance the software with new features, ultimately improving its performance. Key Responsibilities: - Identify and address issues causing certain features not to work - Implement necessary bug fixes - Integrate new features in a seamless manner - Optimize the code for improved performance familiar with firebird database and report builder. Ideal skills and Experience: - Strong background in Delphi development, specifically with Delphi 5 - Proven track record of fixing bugs and enhancing existing software - Understanding of software optimization techniques - Ability to work effectively both independently and as...

...experience with the QT framework - Excellent User Interface (UI) design skills - Knowledge in Python and 3D will be a plus The main function: 1: Windows platform, jointly developed by QT+python. 2: Communicate with hardware devices through serial port/Ethernet. 3: Support MODBUS-485, TCP, UDP and other communication protocols, with 1ms cycle response. 4: Support hardware parameter configuration, multi-channel data analysis, storage, data playback, and support real-time data curves at different communication rates. 5: Supports local and cloud dual storage. 6: Port a Python data analysis open source library (provided by us), which needs to display the analyzed data in the form of a 3D model. The main objective is to develop a user-friendly, robust and efficient desktop app...

...Will measure 5 Inch (127MM) Height x 8 Inch (203MM) Width. Key Points For Each Label Are: CanLiFe Lithium Golf Cart Battery * A Single Drop In CanLiFe Lithium Battery Replaces An Entire Set Of Conventional Lead Acid Batteries & Can Operate A Stock Golfcart In Any Terrain. * Assembled In Canada * Backed By A 6 Year Limited Warranty * Estimated Range And Capacity To Be Displayed Prominently * Bluetooth Enabled - Monitor State Of Charge From Your Phone Total of 12 Labels to be created: Front Plaques: CanLiFe Lithium Golf Cart Batteries 36 Volt 56 Amp Hour (2.07 Kilowatt) Capacity 25-30 Kilometer Range 48 Volt 36 Amp Hour (1.86 Kilowatt) Capacity 25 - 30 Kilometer Range 48 Volt 56 Amp Hour (2.90 Kilowatt) Capacity 45 - 50 Kilometer Range 48 Volt 112 Amp Hour (5.8 Kil...

...hydrometer needs to be available through a web interface. This online access will allow me to monitor multiple batteries from a central location, offering more convenience and control. Ideal Skills and Experience: - Experience in designing and developing electronic hydrometers or similar IoT devices. - Proficiency in interfacing such devices with microcontrollers. - Data should be passed to serial port of controller - Understanding of battery health and the importance of specific gravity measurements in lead acid batteries....

...post('/webhook', async (req, res) => { const userQuery = ; const response = await ({ model: 'text-davinci-003', prompt: userQuery, max_tokens: 150, }); const botResponse = [0].(); ({ fulfillmentText: botResponse, }); }); const PORT = || 5000; (PORT, () => { (`Server is running on port ${PORT}`); }); Setting Up: Create a Google Cloud Project: Enable the Dialogflow API. Create a Dialogflow Agent: Link it to your Google Cloud Project. Set Up Intents and Entities: Define actions Google Assistant should trigger. Deploy Webhook: Host your webhook on a reliable server. Conclusion: By integrating Google Assistant, Dialogflow

We are seeking an experienced freelancer to set up a Node.js application on our web hosti...is running and accessible via the specified domain. - Verify and configure the necessary firewall and port settings to allow traffic on the required port (default 3000). - Provide documentation of the steps taken and any configurations made. Specifics: The script should listen on port 3000 and respond with a message "Fixed Response" for any request. Sample Script: const http = require('http'); const hostname = '0.0.0.0'; const port = 3000; const server = ((req, res) => { = 200; ('Content-Type', 'text/plain'); ('Fixed Responsen'); }); (port, hostname, () => { (`Server running at http:...

Project Description: Mobile Application for Inventory Management Objective: Develop a Minimum Viable Product (MVP) of an Android application for inventory management and tracking using GPS and Bluetooth beacons. Technology: Flutter Key Requirements The Application -------------------------- - The app should primarily be developed in Flutter. However, since a Foreground service is required to run indefinitely in the background, it is acceptable to create this service in Kotlin or Java. Communication between Flutter and the native code should be done via Platform Channels (MethodChannel and EventChannel). User Interface ----------------------- The app should have three main screens: - Splash Screen: Displays the app logo. - Login Screen: User authentication with username and pa...

I'm in need of a skilled Delphi developer who can quickly generate a program that can dive into the registry of a Windows machine and extract the names of all programs listed in the "Add/Remove Programs" section. Key Requirements: - The code should be written in Delphi. - It should effectively scan the registry. - Extracted program names should be displayed in a listbox. This is a simple task, but it's important that the code is efficient and free from bugs.

Seeking Application Developer for Consultation We want to develope a cross-platform mobile ...user experience and functionality. Consultation Scope: - Secure File Upload: Enabling users to upload audio files with embedded encrypted keys. - Encryption & Decryption: Implementing robust encryption methods to ensure the secure attachment of keys to audio files. - File Sharing Facilitating the secure transfer of files between users within the app. - **Bluetooth Key Sharing:** Allowing the encrypted key to be shared via Bluetooth between devices. - Cross-Platform Development: Ensuring compatibility and seamless functionality on both iOS and Android platforms. - **Integration with Shopify: Connecting the app with our existing Shopify website for user authentication and tr...

VM CREATION (1 VPS BIND) os CentOS 8 & 9 Stream MINIMAL Direct installation or converted from CentOS 8 Linux. (Recommended) panel add install:https://control-webpa...nginx server VARNICH APACH very important !!!!!snaphopt image creation just servers working (just os) (without admin panel)!!!I want to be able to do restores, for a new installation of another panel, if necessary.! !!! !! !!!!!! link to server add SSL ADD ALL PHP CGI AND FMP (latest 6 versions)PHP AVAILABLE FOR CUSTOMER FOR ALL SERVER ADD PHP VERSION 7.9 PACHT FMMPEG add latest version change SSH22 port verification example: ns1 . add IP.: add a Mac machine adds IP.: adds mac Example of adding HOSTENAME:

I'm seeking a knowledgeable professional who can guide me through how to view HTTPS calls in Fiddler on Windows that have originated from an Android mobile application (running on either Bluestacks or Nox emulator) This may (or may not) need: - SSL unpinning - ProxyCap to route the traffic to fiddler port The session can be conducted remotely, either through detailed instructions or a shared screen conference call for a more interactive experience. Please demonstrate via a video/screen record that you are able to do this otherwise I won't respond. This should show you opening an app (not a browser) in Nox/Bluestacks and the HTTPS calls then being displayed in fiddler.

I'm looking for a skilled professional to create a Web Assembly prototype, , using a small Delphi application that primarily showcases an interactive user interface. The aim is to target the prototype for web browsers. Key Requirements: - Creation of a Web Assembly prototype utilizing a Delphi application. - Focus on showcasing a simple interactive user interface The Prototype: - The user interface for the prototype is envisioned to be simple, consisting of basic elements. - The primary focus should be on the seamless integration of the Delphi application's functionality into a web browser environment.

I'm in need of a SOCKS Proxy server as my ISP has closed port 25, which is essential for email services. Key requirements: - Set up a SOCKS Proxy server: The server's primary function will be to support email services. - Implementation: The server should be configured to support my email client. - Security: Ensure the server is secure and reliable. Ideal skills and experience: - Proficient in setting up SOCKS proxies. - Expertise in configuring services for email clients. - Knowledge of network security standards. The project might involve more tasks depending on the specific needs of the proxy server.

...configurations - Maximum amperage capacity of 100A - The ability to alter the BMS ampere capacity by adding or removing MOSFETs or any other relevant hardware as required - The BMS should include essential safety features such as: * Temperature monitoring * Short circuit protection * Cell balancing * Reverse polarity protection - The system should allow for charging and discharging through the same port I need this project to be completed within a month. Ideal skills and experience for this job include: - In-depth knowledge and experience in BMS design, particularly with LiFePO4 batteries - Proficiency in creating flexible BMS systems with variable ampere capacity - Extensive experience with temperature monitoring, short circuit protection, cell balancing, and revers...

I need assistance programming an Arduino Opta PLC for remote monitoring. - The device must: - Monitor all 8 voltage inputs. - Provide access to monitored data through a web interface. Including Bluetooth capabilities and Wifi. Needs to send emails to customers or notifications to my apps. Ideal Skills: - Proficient in Arduino programming - Experience with PLC programming - Knowledge about remote monitoring and control systems.

Please include the word "mouse" to ensure your submission is read. I have a Joomla site that I need to port over to WordPress, and I'd like to get a unique design for the new site. Key Requirements: - Porting Joomla site to WordPress: I need an experienced developer who can smoothly and completely move the content, structure, and functionalities of my existing Joomla site to WordPress. - Design: I will be working on building the User Experience, All I need is the data in a structured format using ACF. Your Responsibilities: - Migrate all the existing content from Joomla to WordPress staging site. This includes pages, posts, images, videos, and any other relevant content. Skills and Experience: - Proficiency in Joomla and WordPress: You should have a strong backg...

...both Windows 10 and 11 to download documents via either email or browser links. Project description: Set up Win10/11 so that the download starts comfortably when you click on an FTP URL link on a website (various browsers) or in mail clients (e.g. Thunderbird). After setting it up once, it should no longer be necessary to enter the FTP access data again. The FTP server expects Explicit SSL/TLS (port 21). The link/URL typically has the following structure: ftp://ftp_username[at] Either the user should be asked where he wants to save the download file, or it is permanently saved in the settings. Ideally, well-known applications are used for file transfer, such as WinSCP, FileZilla or MS File Downloader. Your own suggestions are welcome. 1. Milestone: Setup as

I have a delphi project that i need compile. The project need some complements that I have but i dont know how to install them. I need that you make me a video in your pc installing the complements and compiling the project for I can do the same in my pc. Thanks you !

VM CREATION (1 VPS BIND) os CentOS 8 & 9 Stream MINIMAL Direct installation or converted from CentOS 8 Linux. (Recommended) panel add install:https://control-webpa...nginx server VARNICH APACH very important !!!!!snaphopt image creation just servers working (just os) (without admin panel)!!!I want to be able to do restores, for a new installation of another panel, if necessary.! !!! !! !!!!!! link to server add SSL ADD ALL PHP CGI AND FMP (latest 6 versions)PHP AVAILABLE FOR CUSTOMER FOR ALL SERVER ADD PHP VERSION 7.9 PACHT FMMPEG add latest version change SSH22 port verification example: ns1 . add IP.: add a Mac machine adds IP.: adds mac Example of adding HOSTENAME:

I'm in need of an experienced Android developer to update our Java-based app, originally designed for Android 5 KitKat, to work seamlessly on modern tablets. Key Requirements: - Improve User Interface: The project involves enhancing the app's existing UI. - Compatibility Upgrade: Th...Requirements: - Improve User Interface: The project involves enhancing the app's existing UI. - Compatibility Upgrade: The current app is only compatible with Android 5 KitKat; the developer must ensure it functions smoothly on contemporary tablets. Additional Information: - The app currently consists of 6-10 screens or activities. - A new feature will be the integration of Bluetooth connectivity. -The app controls hardware via bluetooth, sends PWMs and reads ADC values and read...

...build a remote PC management and control system, a bit similar to TeamViewer or Ammy, but with a few specific features. The project involves: - **Functionalities**: The system should be able to provide the standard functionalities of a remote desktop application, including file transfer, chat, and remote desktop control. This way, I can seamlessly manage the connected PCs without needing to use port forwarding. - **Programming Languages**: The application should be written using C++ and C#. - **OS Support**: The application should be designed to run on Windows only. I'm particularly interested in having the source code once the project is complete. This project is suitable for an individual with proficiency in C++ and C#, as well as a strong background in developing r...

...two very small speakers. The sound file would be a siren with an intermittent horn. I can compose the sound file myself and load it onto the Arduino. There should be a separate potentiometer to control the sound volume. It would be nice if the battery could last an hour or so on a full charge. Once installed into the fire truck, the battery should be able to be recharged through the onboard USB port so as not to have to remove it from the fire truck. Obviously, this would all have to be very small. I have measured the width of the Arduino MKR Zero (about 1") and it should fit within the fire truck no problem. There is limited space above the board for the battery, motor and speakers. Skills and Experience Required: - Expertise in Arduino circuitry and programming. - Past e...

I am looking for an experienced developer capable of creating a Bluetooth iOS app from scratch for controlling low-complexity Arduino devices, particularly LED lights. Key aspects of the project include: - Developing the app from ground zero: As the app isn't based on any existing software, the developer has creative license within the confines of my requirements. - Arduino Device Control: The main function is to control Arduino devices. Familiarity with Arduino-related software is strongly preferred. - Bluetooth Connectivity: The app should maintain stable bluetooth connection with the Arduino devices. - User-friendly interface: It should have an aesthetic, yet functional UI that's easy to navigate. Ideal Skills and Experience: • Extensive knowled...

I am looking for a skilled Civil Engineer to certify a drawing for a service door that is to be installed on the side of my garage in North Port, FL. - The garage is primarily constructed of concrete, and the door will be integrated into this structure. - The project is currently at the planning stage, and the certification is required to ensure compliance with relevant building codes and regulations. Ideal candidates for this project will have: - A background in civil engineering, with experience in structural elements of buildings. - Familiarity with construction codes and regulations in North Port, FL. - A detail-oriented approach to ensure that the drawing meets all necessary standards.

...root@grml ~ # sudo mount /dev/MY_ROOT_PARTITION /mnt Replace the placeholder MY_ROOT_PARTITION with the name of the root partition of your VPS. Example: root@grml ~ # sudo mount /dev/vda1 /mnt Accessing Data Once the file system is mounted, you can use the following access data to access the file system using an SSH or SFTP connection: Host: Server IP User: root Password: (password you have set) Port: 22 Path of the file system: /mnt Backing up Data from the Server to a Local Computer Using Filezilla To back up your server data to a local computer, you can use the FileZilla program. FileZilla is available for computers with Windows, MacOS and Linux operating systems. You can download the latest installation file for your operating system at the following URL:

...I've reinstalled Windows XP and all relevant software on the PC. However, I'm facing difficulty getting the petrol pump controller to communicate with the local MSQL database. Key Points: - The PC is running on Windows XP. - The petrol pump controller uses a serial port for communication. - The issue lies in configuring the connection between the petrol pump controller and the MSQL database. Requirements: - You'd need to have a strong grip on database management, particularly with MSQL. - Proficiency in networking and serial port communication is a must. - Experience with Windows XP is preferred. - Troubleshooting skills and experience in resolving connectivity issues will be highly valued. The ideal candidate for this project will be able to quickly ide...

...developer to create an android app that will connect with machine hardware via Bluetooth and communicate with an ESP32/similar microcontroller. Also design a PCB to integrate the microcontroller with the machine's electronically operated devices. - Design: I don't have a specific design in mind, so I'd need your help with designing the app. - Design: Design a pcb to integrate microcontroller and other electronically operated features. - Functionality: The key functionality of the app will be to control the LEDs on the machine. More specifically, I'd like the LEDs to be used to scan an object. Ideal skills and experience for this job include: - Proficient in Android app development - Experience with Bluetooth integration - Familiarity with ESP32 or si...

...Development of the SIP Client: Implement a SIP client that can be integrated as a plugin into the Milestone software using the provided SDK. Ensure the compatibility of the SIP client with current and future versions of the Milestone software. SIP Client Configuration: Add a user interface in Milestone to configure the SIP client. Configuration parameters should include: SIP server address. Connection port. Username. Password. Additional options such as preferred audio codec and NAT options. Call Automation: Implement the functionality to automatically answer calls. Ensure that when the call is answered, it is automatically recorded in the Milestone system. Integration and Testing: Integrate the SIP client as a plugin into the Milestone environment ensuring smooth and uninter...