3D Model for a Structural Skid

Imefungwa Ilichapishwa Miaka 4 iliyopita Kulipwa wakati wa kujifungua
Imefungwa Kulipwa wakati wa kujifungua

The Acid cleaning skid consists of the following major component:

 Batching Tank : Sized with a working volume of 1000 liters including a flat sloped bottom head, with cleaning connection/low point drain; on one side of the tanke these is a small hopper connected with a sliding valve to allow safe handeling of solid acid through to the tank.. Tanks has a side level indication to enable operator reading level for ease of operations and tank filling.

 Batching Tank Agitator: A standard motorized mixer with fixed speed agitation.

 Transfer Pump: Designed to satisfy a 30 gpm at a pressure of 25 psi (assuming

water-like properties). The pump operations is controlled via start/stop buttons by the unit

operator, and is guided/protected by the specified minimum level defined by a low level switch.

 All this is installed on a structural Skid with hard piping.

the 3D model shall show the Control Panel for the pump and Tank motor.

The following Drawings are required as a deliverable from the 3D model:

 System schematic drawings.

 General Arrangement Drawing

 Skid Isometrics

 3D package assembly (If requested added cost).

 Fabrication drawings.

attached is a schematic for the tank not with relevant dimensions.

Uhandisi wa Kiufundi Solidworks Uundaji wa 3D Ubunifu wa Viwanda CAD/CAM

Kitambulisho cha Mradi: #21147389

Kuhusu mradi

29 mapendekezo Mradi wa mbali Ipo mtandaoni %project.latestActivity_relativeTime|badilisha%

29 wafanyakazi huru wanazabuni wastani wa $155 kwa kazi hii

kalp29

hello sir i am professional mechanical engineer with first class .I am capable in 2d drawing , 3d modelling etc from past decade . send me a message so i can send my samples . please give me an opportunity to work. re Zaidi

$140 USD kwa siku 7
(Maoni 263)
7.2
rabbora

I am product designer. I am very interested in your project. I have experience to design and render many products using Autocad, Solidworks and 3ds max. Especially, IC engine and combustion, aircraft, furniture, many c Zaidi

$140 USD kwa siku 2
(Maoni 179)
7.3
yongjun514

Dear, Sir. Here is my profile and portfolio link. https://www.freelancer.com/u/yongjun514?w=f I have read your project descriptions carefully. So I'm sure I can complete it successfully in your timeline. If you hire m Zaidi

$150 USD kwa siku 3
(Maoni 179)
7.3
ashrafshekh

Hello, ⭐Dear Employer⭐ Greetings of the day, I have gone through the description & found interesting. I have done many project related to mechanical engineering, 3D modelling, product designing, any kind of simulat Zaidi

$140 USD kwa siku 7
(Maoni 77)
7.1
andreird129

Hello Dear I am very interested in your project. I have over 10 years of experience for Product design and 3D modeling in solidworks & 3Ds max. Please check my portfolio https://www.freelancer.com/u/andreird129?w=f Loo Zaidi

$140 USD kwa siku 7
(Maoni 88)
6.4
Malek3D

Hi, I have made something like your project for Liquid Pump on 3D animation video, and I'm sure I can do it in best quality. Please feel free to talk to me if you have any questions or want to see my works.

$250 USD kwa siku 7
(Maoni 40)
6.1
olaideejiwole

Hello sir/ma, I'm interested in taking this task up for you. I am a Mechanical Engineer with a masters degree in solid mechanics and a product optimization specialist by profession with 7yrs experience in Mechatronic, Zaidi

$30 USD kwa siku 1
(Maoni 31)
5.7
krupal599

Neocent / Technoledge focuses on building strong customer relationships by providing exceptional service with integrity, honesty and fairness, while paying close attention to completion deadlines and budget requirement Zaidi

$250 USD kwa siku 5
(Maoni 49)
5.7
thanhbinh160886

I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic p Zaidi

$250 USD kwa siku 7
(Maoni 29)
5.6
enghamza12

****** ma shaa Allah ****** I'm are professionals in ✔️MATHEMATICS, ✔️MATLAB, ✔️SOLIDWORKS, ✔️ANSYS FLUENT, ✔️PHYSICS, ✔️COMSOL ✔️PDF to Doc or all format and versa I am a boss. ⭐⭐⭐ Major skills and Qualifications ⭐⭐ Zaidi

$140 USD kwa siku 1
(Maoni 35)
4.7
mohsamehahmed23

((( CUSTOMER SATISFACTION IS THE FIRST PIROURITY FOR US ))) Hello there!!!! my name is Mohamed sameh from Egypt , I am specialized for 8 years in some programs and skills: - - 3d modelling , Drawing and assembly of 3 Zaidi

$100 USD kwa siku 7
(Maoni 20)
4.1
IliusSagar

Hi brother! I could absolutely help with your Project. As per your requirement, I would like to tell you that i have a very strong-experience of more than 8 years in the field of 3D Design. Please, kindly preview the Zaidi

$50 USD kwa siku 2
(Maoni 16)
4.2
aliozcancicek

Hi, My name is Ali Özcan ÇİÇEK. I am a mechanical engineer. I read your job carefully and found that it was suitable for my skills I have been working mechanical design for 14 years. During this time I designed more Zaidi

$140 USD kwa siku 3
(Maoni 1)
3.6
popov4sa

hello ! I have gone through your job posting and become very much interested to work with you. I am an expert in this field. I have already completed several projects like this. Awaiting an affirmative response from Zaidi

$140 USD kwa siku 7
(Maoni 2)
1.9
ExquisiteWords93

Hello Sir, I have extensive experience in a variety of professional construction activities, including over 8 years providing building inspection and recommendations for renovations. I am an expert with AutoCAD, archit Zaidi

$100 USD kwa siku 3
(Maoni 1)
2.0
FESCAJADILLO1985

Hello, I am a mechanical engineer with ten years of experience in machine design, structural elements, design of thermal equipment, engineering products, cooling systems, control and automation of machines, turbomachin Zaidi

$100 USD kwa siku 7
(Maoni 1)
2.1
NineGeer

Hi, I have worked designing structural, tanks and lines for electodeposition coating wich have similar stations but for prepare the reactants acid solutiins, also my regular work is plant stations for Medical, Automoti Zaidi

$222 USD kwa siku 3
(Maoni 1)
0.7
ihsanmustamar605

Hi! i have some a view suggest for your project, because in your description for the project is my daily work field, if you interest you can view my portofolio or contact me. Regard

$100 USD kwa siku 3
(Maoni 0)
0.0
jadchebly

Our team is consisted of qualified and experienced project managers, mechanical engineers and metal manufacturing specialists who serve as design consultants to our work. Our engineers are proficient in providing engin Zaidi

$200 USD kwa siku 5
(Maoni 0)
0.0
dinesh130786

Hello sir, welcome i would like to do this task as specified.I extremely sure to do this as my ability and my experience makes me for this surety. My brief profile are here_you can contact me on my no. eight nine three Zaidi

$140 USD kwa siku 7
(Maoni 0)
0.0