Emmanuel O. Profile | Freelancer

Jinsi inavyofanya Kazi

TALII

Matlab and Mathematica

0.0

(0 hakiki)

Picha ya jalada la wasifu

Sasa unafuata

Hitilafu katika kufuata mtumiaji.

Mtumiaji huyu haruhusu watumiaji kumfuata.

Tayari unamfuata mtumiaji huyu.

Mpango wako wa uanachama unaruhusu tu ufautiliaji 0. Boresha hapa.

Umefaulu kuacha kufuata

Hitilafu wakati wa kuacha kumfuata mtumiaji.

Umefaulu kupendekeza

Hitilafu katika kumpendekeza mtumiaji

Hitilafu fulani imetokea. Tafadhali onyesha upya ukurasa na ujaribu tena.

Barua pepe imethibitishwa kwa ufanisi.

$6 USD / saa

Bedera ya NIGERIA

abuja,

$6 USD / saa

Ni saa 7:18 AM hapa

Alijiunga Novemba 30, 2018

0 Mapendekezo

Emmanuel O.

@Emmanuelola

0.0

(0 hakiki)

0.0

0.0

0%

0%

$6 USD / saa

Bedera ya NIGERIA

abuja,

$6 USD / saa

N/A

Kazi Zilizokamilika

N/A

Kwa Bajeti

N/A

Kwa wakati

N/A

Kiwango cha Kuajiriwa Tena

MATLAB, Solidworks, Fluidsim, CAD and excel.

I'm a fresh graduate from mechanical department. during my undergraduate study i learned the use of some mechanical software such as MATLAB, Solidworks, Fluidsim( hydraulic and pneumatic) AutoCAD and excel. With my knowledge and experience in the above software, I'm able to handle any mechanical engineering job and assignment

Angalia woteJava Developers in Nigeria

Wasiliana na Emmanuel O. kuhusu kazi yako

Ingia ili kujadili maelezo yoyote kwenye gumzo.

Portfolio

I worked on Fluidsim (both hydraulic and pneumatic) during my undergraduate studies. The attached files proof my ability to handle any fluidsim work. Payment will be done after the end of the project. I still have many of this work done by me

FluidSim

I worked on Fluidsim (both hydraulic and pneumatic) during my undergraduate studies. The attached files proof my ability to handle any fluidsim work. Payment will be done after the end of the project. I still have many of this work done by me

FluidSim

I worked on Fluidsim (both hydraulic and pneumatic) during my undergraduate studies. The attached files proof my ability to handle any fluidsim work. Payment will be done after the end of the project. I still have many of this work done by me

FluidSim

I worked on Fluidsim (both hydraulic and pneumatic) during my undergraduate studies. The attached files proof my ability to handle any fluidsim work. Payment will be done after the end of the project. I still have many of this work done by me

FluidSim

I worked on Fluidsim (both hydraulic and pneumatic) during my undergraduate studies. The attached files proof my ability to handle any fluidsim work. Payment will be done after the end of the project. I still have many of this work done by me

FluidSim

I worked on Fluidsim (both hydraulic and pneumatic) during my undergraduate studies. The attached files proof my ability to handle any fluidsim work. Payment will be done after the end of the project. I still have many of this work done by me

FluidSim

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

I worked on Fluidsim (both hydraulic and pneumatic) during my undergraduate studies. The attached files proof my ability to handle any fluidsim work. Payment will be done after the end of the project. I still have many of this work done by me

FluidSim

I worked on Fluidsim (both hydraulic and pneumatic) during my undergraduate studies. The attached files proof my ability to handle any fluidsim work. Payment will be done after the end of the project. I still have many of this work done by me

FluidSim

I worked on Fluidsim (both hydraulic and pneumatic) during my undergraduate studies. The attached files proof my ability to handle any fluidsim work. Payment will be done after the end of the project. I still have many of this work done by me

FluidSim

I worked on Fluidsim (both hydraulic and pneumatic) during my undergraduate studies. The attached files proof my ability to handle any fluidsim work. Payment will be done after the end of the project. I still have many of this work done by me

FluidSim

I worked on Fluidsim (both hydraulic and pneumatic) during my undergraduate studies. The attached files proof my ability to handle any fluidsim work. Payment will be done after the end of the project. I still have many of this work done by me

FluidSim

I worked on Fluidsim (both hydraulic and pneumatic) during my undergraduate studies. The attached files proof my ability to handle any fluidsim work. Payment will be done after the end of the project. I still have many of this work done by me

FluidSim

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

On the attached files, i used Matlab to code the calculation a very long equation for economic dispatch and Reliability in power system. I also used Matlab to write code and analysed data retrieved from a pulverizer (pulverizing machine) in order to establish the signature(behavior) of the machine. And i used Eureqa to analysed data retrieved from the same pulverizer (pulverizing machine). The results of the two software were compared and the best software was selected. Though the result of the two software were almost the same nevertheless, i still prefer Eureqa for such analysis.

MATLAB and EUREQA softwares

Kaguzi

Mabadiliko yamehifadhiwa

Hakuna maoni ya kuona hapa!

Wasiliana na Emmanuel O. kuhusu kazi yako

Ingia ili kujadili maelezo yoyote kwenye gumzo.

Udhibitisho

Wafanyakazi Huru Wanaopendelewa

Amedhibitishwa Kiutambulisho

Amedhibitishwa Kimalipo

Amedhibitishwa Kisimu

Amedhibitishwa Kibarua pepe

Facebook Imeunganishwa

Ujuzi wa Juu

Matlab and Mathematica

Angalia Wafanyakazi Huru sawia:

Java Developers in Nigeria

Java Developers

Javascript Developers

Python Developers

Pitia Onyesho Sawia

Mtumiaji wa zamani

Mtumiaji Mwingine

Mwaliko umetumwa kwa mafanikio

Asante! Tumekutumia kiungo cha kudai mkopo wako bila malipo kwa barua pepe.

Hitilafu fulani imetokea wakati wa kutuma barua pepe yako. Tafadhali jaribu tena.

Onyesho la kukagua linapakia

Ruhusa imetolewa kwa Uwekaji wa Kijiografia.

Muda wako wa kuingia umeisha na umetoka nje. Tafadhali ingia tena.