Looking for an Electrical Engineer with different expertise

HI I am experienced electronics engineer with more than 9 years of experience. I can do it for you. I have completed more than 200 projects here all related to different electronics engineer skills. I am waiting for your reply to start Regards

Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in SMPS, supplies design from few watts to KW range using Buck, Boost, Buck -boost, Push Pull and H-bridge inverters I am excellent in solar, wind, Micro grid, smart grid and IEEE bus systems development in MATLAB Simulink Design, PSPICE, PSIM ,MULTISIM and LTSpice , Proteus Simulations. I did many projects for MS and PhD thesis like grid connected solar, wind, wave energy grid connected systems using MPPT, Multi-level converters, Inverters with different control algorithms, hybrid systems development and D-STATCOMs, FACTS devices for power stability, quality and control electrical vehicles, inductor motors. I worked for vehicle design simulation for different applications. I use to design Solar with MPPT using buck, buck-boost topologies, Power quality and control using Active filters, Opamp based circuit, digital circuits etc. I understand your requirement and ready to work for you. Please contact me for further discussion.

Hello, I'm an electronic engineer with more than 10 years in the design market. I work with Altium as with Eagle and handle spice based simulators and Proteus. Please if you have more information contact me by chat. Also, you can always see my profile. Regards NOTE: My budget is 22U$D/hr but I can't put it in the blank

Before awarding to anyone, give me a chance to discuss it with you. I am embedded system electronics engineer with 3 years of experience in iot development. I have expertise in development board Arduino, ESP8266, Raspberry Pi, etc and the microcontroller ARM, Microchip, stm32f, etc. I can design and develop PCB. I have hands on experience in mobile app development that communicates with electronic hardware. I have used MATLAB Simulink, ETAP, ADS, Proteus, etc. Please consider sending me a message so that we can discuss this further

I am an Electrical Engineer with a masters degree and I have high proficiency in Electrical Engineering, PCB Design(Altium and eagle) HVAC, LTE system model, Thermal system design, FPGA, Verilog / VHDL, Matlab/ Simulink, Microcontroller, Modeling, optimization, simulation of building energy systems: PCB Layout, Arduino and have been working on Industrial Automatics and Electronics. my fields of interest are Schematic design, Prototyping, Development of Electronic systems, Firmware and Software development. Once you share the project, I will have a look & confirm if I can do it. I’m honest, creative and a unique person to carry out your tasks given to me. Leaving your project on our hand is privileged; we'll make sure that the project is done in a perfect way and do our best until you were satisfied. I would love to discuss this project with you and meet your exact requirements. I am confident I can provide you with top-notch materials that will fit your needs. I pride my work on being professional, of the highest quality and always delivered on time. you can hire me directly through this link https://www.freelancer.com/u/olaideejiwole

Professional Eplan electric p8 user. Electrical engineering. Project management. PLC programmer. Scada designer.

Hi! My name is Fernando Téllez. I am a senior year student of electrical engineering at Universidad Simón Bolívar (USB), one of the most prestigious universities in my country (Ranked 34° at the QS University Rankings: Latin America 2015). I code using matlab ON A DAILY BASIS to solve any kind of engineering, logical, statistical and mathematical problem.

Hello, I study electronics at Politecnico di Torino and I can help you with the listed content. Please give me all the details. Best regards

Hi, as there is no certain project or work required to be done described yet, it would be interesting to discuss the subject of it. I have experience in development of smaller devices as well as their systems using the mentioned by you tools, including analog and digital circuits such: power supply design (according to requirements about input and output parameters, reliability, efficiency, safety considerations); analog signal processing; digital signal processing; wireless technologies (Wi-Fi, Bluetooth using embedded devices); common communication protocols (USB, SPI, parallel interfaces,..); embedded software development. Contact me for further information, please.

Hello! I am very interested in your post project. i have rich experience on it. I think this project is very suitable for me and i am sure i can give you good result . I can help you if you'd like looking forward to work with you. thanks regards

Hello sir I am an electrical engineer with expertise in MATLAB and other fields that you have mentioned due to 3+ years experience. Kindly respond with details so that we can work together. Thanks.

Hi, Please let us know a good time to discuss your requirement. We have very good expertise with PCB design, Matlab and embedded development; and have built a numerous IoT solutions. To see a reference of our work, please visit our Products/SMART IOT section on our website Lokawiz: lokawiz.com. Best Regards, Lokawiz Team

I have a diverse experience when it comes to electronic circuit design, as i have a profound engineering background. Kindly review my PORTFOLIO, i can get the job done thanks!

Hello, I'm an Engineer with 8+ years of experience in the design of electrical power systems in residential, commercial and industrial facilities. In my work the use of CAD tools is essential, therefore I have extensive knowledge in the use of AutoCAD, in order to develop the plans and electrical drawings necessary for each project. Also I'm specialized in ETAP Powerstation at an intermediate level, this allows me to model the electrical system required, and perform the requested studies such as: load flow, short circuit analysis, device coordination, among others. Unfortunately I possess little experience in the electronics field and basic knowledge in the use of MatLab and general programming. If this seems suitable for your needs, I would like to discuss more about it via chat, if possible. Looking forward to working with you. Best regards.

Hellou, I want a introduce myself. I have a Master Degree in Electronics. I worked on many projects like Smart home systems in a research team at my workplace and a lot of research project on my faculty. Because of that I was used to on MATLAB as my tool for checking, and testing every idea. Also, I am an Assistant Professor at University in Sarajevo (Resonsible for couse: "Analog Electronics"). Also in my ex-company, as a combined research and embedded engineer I was used to Altium Designer (developing schematics, PCB design and layout) and programming (C, C++ languages). Also, I have more expirience with other programming languages. Now, in my currently company, as a Project engineer I often use AutoCAD software. Also I am good with power electronics, and ETAP is not problem for me. I am ready for all types of cooperation. If you have some questions, dont hesitate to contact me. Best regards

Hi, I am Electronics Engineer and I have more than 5 years of Experience in design and development. Please share your project details. I can work with you for full time i.e. 40 hours a week. Waiting for your message. Thanks and regards

A student of Electrical and Computer Engineering currently enrolled in Masters Program at University of Engineering and Technology Lahore I have more than four years of experience in Programing. I am an expert of Matlab. I have done many projects on matlab. i am using it for more than 5 years.. I am almost familiar with every toolbox present in it

Hello I have working with matlab for past 4 year and also pcb designing. And overall programming of the devices. I have design and program the entire 3u cubesat. Looking forward to work with u Cheers Regard Arun

I'm not an electrical engineer, I'm a Software developer with huge experiences in Arduino and ARM C and C++ Keil programming (almost 5 years). I have good knowledge in digital and designed my own board by STM32F407 included SPI TFT display, DS3231, Capacitor Touch Keys, RFID and more by using related datasheets and standards. Board is designed by Altium from scratch.

I'm an electrical engineer with expertise in the power electronics and embedded technology. I'd like to know about the details of the project. Kindly share the details and go through my profile. I'm eagerly waiting for your reply. Thanks and Regards