Find Jobs
Hire Freelancers

Build me a quadcopter drone

$250-750 USD

Imefungwa
Imechapishwa over 1 year ago

$250-750 USD

Kulipwa wakati wa kufikishwa
I would need a quadcopter drone put together having motors, escs, battery, and so on without a frame, but mounted on a board. Everything would already be connected together and ready to go ,without the need for calibration, using a remote control at the flip of a switch. The battery would be at least a 6s, but preferably higher like 8s. The motors would need to be high torque and be as flat or least in height as possible. They would need to have the metal shaft already attached and preferably a threaded shaft. The bottom of the motor would preferably be flat too. There are no any specific measurements really, but the motors would be short in height like around an inch in height ,for example, and the motor shaft would preferable be 5 mm in diameter. The motors would preferable be under 500 kv. Also, I may need hollow screws that are compatible with the motors to mount them.
Kitambulisho cha mradi: 34800275

Kuhusu mradi

18 mapendekezo
Mradi wa mbali
Inatumika 1 yr ago

Unatafuta kupata pesa?

Faida za kutoa zabuni kwenye Freelancer

Weka bajeti yako na muda uliopangwa
Pata malipo kwa kazi yako
Eleza pendekezo lako
Ni bure kujiandikisha na kutoa zabuni kwa kazi
18 wafanyakazi huru wana zabuni kwa wastani $623 USD kwa kazi hii
Picha ya Mtumiaji
Hi, I’m interested in your project, I’m a professional electrical engineer with more than seven years experience in drone engineering. I deliver excellent work within a short time. I’ll be happy if you reach out.
$750 USD ndani ya siku 7
5.0 (40 hakiki)
7.4
7.4
Picha ya Mtumiaji
Hi, I hope you are doing fine. I have almost 10 years of experience in machine learning algorithms. I can implement various types of artificial intelligence algorithms including yours with Matlab, Python and etc. I have PhD from Tohoku University and have several journal publications on the subjects. You can see portfolio for my previous projects. I read about your project and am interested in working with you. Please send me a message so that we can discuss more. Best regards.
$500 USD ndani ya siku 7
4.7 (119 hakiki)
7.6
7.6
Picha ya Mtumiaji
Hi i am an aerospace engineer with MS in Flight controls system. I have 5 years of experience in modelling, simulation and controls of quadcopters and fixed wing drones. Please share you drone specs or let me choose for me and discuss further.
$500 USD ndani ya siku 7
5.0 (52 hakiki)
6.6
6.6
Picha ya Mtumiaji
Hello, I have you are doing well. I am embedded engineer and worked as a research in well know labs. Let us discuss your project and deliverables over chat. Regards, Zain UL Abideen
$500 USD ndani ya siku 7
4.9 (90 hakiki)
6.7
6.7
Picha ya Mtumiaji
Hello, good time Hope you are doing well I'm expert in MATLAB/Simulink and Python programming and by strong mathematical and statistical background, have good flexibility for solve your project. I have many experience practical and theoretical in implementation different algorithms (such as: state estimation and Kalman filter, design controller, analysis closed loop stability, signal and systems, signal processing, heuristic optimization, fuzzy logic, neural network and machine/deep learning fields). Evidence of this claim exist in the portfolio. I have read your project description and I can help you (without any plagiarism). Please send me the details of your project. Thanks for attention
$500 USD ndani ya siku 7
5.0 (14 hakiki)
6.4
6.4
Picha ya Mtumiaji
Hello I am Mechatronics and Control Engineer having done various projects in analogue and digital electronics. I have strong command on Matlab/Simulink/Proteus/LT Spice/Arduino, Artificial Intelligence/Machine Learning and Micro-processors. I have done many projects related to Electronics and Robotics like Vehicle-To-Grid Technology in a Micro-grid, Power-Electronics-Based Energy Management System, Hybrid PI-Fuzzy Controller, Weather Forecasting using ANN, and with my experience, I assure you that I can do your project very efficiently and within the deadline. I can guarantee high-quality results that will exceed your wildest expectations. I commit myself to ensure timely delivery and offer the best services to make your documents outstanding. I will be looking for a positive response from you Regards Engr. Abdullah
$250 USD ndani ya siku 3
5.0 (76 hakiki)
6.1
6.1
Picha ya Mtumiaji
Hi, We are a team of professional engineers with an experience of more than 5 years in design, analysis and fabrication of different types of Unmanned Air Vehicles for several applications. Our small and close-knit team of experts specializes in aircraft design, Structures, flight controls, stability, aerodynamics and manufacturing. With an industry experience of more than 5 years, we ensure that our manufactured products are compliant with airworthiness regulations and licensing requirements of US and Europe. Our state-of-the-art facilities enable us to deliver quality products to our customers. Porfolio: 1. Design and development of decentralized swarm of quadcopters 2. Detailed and development of VTOL UAVs 3. Structural design and Analysis of UCAVs Further details related to our portfolio can be seen in portfolio section and more can be shared in chat. We strive to satisfy our clients with the quality of work that we provide. Feel free to contact us. We look forward to working with you. Thank you!
$500 USD ndani ya siku 7
4.9 (38 hakiki)
5.9
5.9
Picha ya Mtumiaji
Good day, I have more than 30 years experience in quadcopter drone designing. I can help to build a quadcopter drone with motors, escs, battery in a quality and timely manner. Please share me more details about this project and I would the best fit for you. I would like to have a thorough discussion on this project as there are certain suggestions from my side After dedicating more than 30 years to the electronics design and development, I am passionate in designing the best products Technology wise I have worked on all the latest technologies like GSM, 5G, Lora, Quadcopter Drone, Motors, Escs, Battery etc. And have worked on more than 20 design tools for designing and simulation purpose Some of the generic queries from my side are: 1. What is the application of this product? 2. What will be the ambient temperature of this product? 3. What are the mechanical constraints to be taken care of? If you are someone who wants to benefit from my experience just message me Hi and I shall be there for you. Regards Hari Mohan Engineering for one is magic for others
$500 USD ndani ya siku 2
4.4 (7 hakiki)
6.2
6.2
Picha ya Mtumiaji
My experiences and expertise in aeromodelling Professional approaches to construction or assembly Material guideline for aircraft construction and multirotor Glues, epoxies and carbon fiber use in model aircrafts Setting up multirotors and programming them. Setting up airplanes and getting them ready for first flight About Me: Meet me, I am a professional unmanned systems engineer having 6 years of experience on all kinds of drones and airplanes. I have vast experience on all kinds of rc planes, quad copters, multi copters, race drone and their related parts such as motors, engines, propellers, batteries etc.
$500 USD ndani ya siku 7
4.6 (11 hakiki)
5.5
5.5
Picha ya Mtumiaji
Dear Client. I have read your "Build me a quadcopter drone " requirement and I am 100% confident that I can complete your project perfectly. My best skills are PCB design and schematic design using Altium, KiCad, Eagle, Proteus. Here is my past experience. - Multilayer PCB design and flexible board design(Schematic, PCB, BOM) - AC/DC DC/DC converter and power converter, power circuit design - USART, USB, SPI, I2C, RF, RS232, BLE communication module design - Motor control, LED lighting design, camera module design - Artistic shape design of PCB and quick error correction -Robot design, simulation in each circuit ⁃Experience in PCB design verification such as prototyping and practical knowledge of FCC certification - Firmware C/C++ (ARM, Arduino,ESP32, PIC) ... When a project is awarded to me, I will do my best to complete your project. I would like to have a specific discussion with you about the details of the project. regards
$350 USD ndani ya siku 7
5.0 (7 hakiki)
4.3
4.3
Picha ya Mtumiaji
Hello. ⭐ ⭐ ⭐ ⭐ ⭐ I have been working for more than 10 Year in the field of Electronic engineering (Hardware / Firmware). I have extensive experience in the areas including Circuit Design, Circuit Simulation (Analog, Digital), PCB design, Embedded Software(Keil, Mplab, FPGA, Arduino, Rasberry PI, C/C++) etc. Expect me to help your business as if I am growing my own. I would love to hear from you. Warm regards
$500 USD ndani ya siku 7
5.0 (4 hakiki)
4.1
4.1
Picha ya Mtumiaji
Hello, this is Koki from Japan who has been working with engineering for over decades now. I have checked your project description thoroughly and I think that I can help you to complete this project fully 100% sure to satisfy your requirement. I'd like to have a brief chat or call to discuss further details about your project soon. Looking forward to working with you together on this project. Thanks! Koki Miyashita.
$1,500 USD ndani ya siku 7
5.0 (1 hakiki)
3.0
3.0
Picha ya Mtumiaji
Hello, this is Mitchell from United State who has several years of experience working with electrical engineering. I am seeing your project details and feeling fully confident to make it working. Looking forward to discussing your project further via interview soon. Thanks, Mitchell.
$1,500 USD ndani ya siku 7
0.0 (0 hakiki)
0.0
0.0
Picha ya Mtumiaji
Hi I have read about your project and am interested in working with you. I will design the PCB for quadcopter and will send to you in working condition. I am an ELECTRONICS ENGINEER with 4+ years of experience in designing circuits and PCBs. I can assure you of the best PCB and Circuit design services as per requirements. I have hands-on command on tools, and skills required for perfect PCB Layout and circuit design. I would like to get more insights into this project. please do drop me a message in the inbox. WHY YOU SHOULD HIRE ME 1. Deep knowledge of PCB Design consideration with understanding concepts like Singal Integrity, Impedance Matching, Thermal Management, layer Stackup and etc. 2. Experienced with Desing Single Layer PCBs, Multi-layer PCBs, Flex-Rigid PCBs, High-Speed PCBs in EDA tools Like EasyEDA, Altium, KiCAD,thinker cad and etc. 3. Deep knowledge of building Analog and Digital Circuits from Scratch with an Understanding of various engineering principles. 4. Experienced in working with Analog and Digital ICs from major manufacturers. 5. Contacts with various PCB Manufactures across the globe who can provide mass manufacturing of PCBs. 6. design pcb library symbols, footprints with 3d models 6. Gerber Produces 7. Bill Of material NOTE - Our bid price may be expensive, But I will offer services and enthusiasm for this project it will be definitely worth paying for it. REALLY LOOKING FORWARD TO HEARING FROM YOU. Thank You
$700 USD ndani ya siku 7
0.0 (0 hakiki)
0.0
0.0
Picha ya Mtumiaji
HI, I have hands on experience on concepting and prototyping of QUADCOPTER. my knowledge might help for your product designing. I have 6years experience in SOLIDWORKS like (CAD, CAM,3D MODELING, Rendering) And 3 Years of experience on NEW PRODUCT DEVOLOPMENT. Depending on your project model I can give the delivery date. THANK YOU,
$500 USD ndani ya siku 7
0.0 (0 hakiki)
0.0
0.0
Picha ya Mtumiaji
I' am a UAV Expert & Designer working for more than 9 years. I've Designed the same drone as per your requirement. Please visit my YouTube Channel to watch video about same Drone which I've built before. Please visit my YouTube channel to know more about my UAV projects: YouTube/Om Hobby Please feel free to contact. Regards, Om Hobby
$570 USD ndani ya siku 10
0.0 (0 hakiki)
0.0
0.0

Kuhusu mteja

Bedera ya UNITED STATES
Brooklyn, United States
0.0
0
Njia ya malipo imethibitishwa
Mwanachama tangu Sep 30, 2022

Uthibitishaji wa Mteja

Asante! Tumekutumia kiungo cha kudai mkopo wako bila malipo kwa barua pepe.
Hitilafu fulani imetokea wakati wa kutuma barua pepe yako. Tafadhali jaribu tena.
Watumiaji Waliosajiliwa Jumla ya Kazi Zilizochapishwa
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Onyesho la kukagua linapakia
Ruhusa imetolewa kwa Uwekaji wa Kijiografia.
Muda wako wa kuingia umeisha na umetoka nje. Tafadhali ingia tena.