Find Jobs
Hire Freelancers

TFT Display board-

€300-1500 EUR

Imekamilika
Imechapishwa over 5 years ago

€300-1500 EUR

Kulipwa wakati wa kufikishwa
I have to develop a board for an embedded display. The display must be 3.5" The board must be based on a STM32 processor (STM32h7 or equivalent would be preferrable) The board must be able to dialogate with other modules with CAN protocoll The board must be turned ON via a message on the CAN protocoll. When the board is OFF it should absorb minimum current. The board must have 8 input for 8 external membrane button Want I expect from this job is the schematics and the BOM (in other worlds you have to take a develop board and adapt the provided schematichs to my specifications) If you contact me I can give you more details of the CAn protocoll and the overall project
Kitambulisho cha mradi: 17965701

Kuhusu mradi

18 mapendekezo
Mradi wa mbali
Inatumika 5 yrs ago

Unatafuta kupata pesa?

Faida za kutoa zabuni kwenye Freelancer

Weka bajeti yako na muda uliopangwa
Pata malipo kwa kazi yako
Eleza pendekezo lako
Ni bure kujiandikisha na kutoa zabuni kwa kazi
Imetolewa kwa:
Picha ya Mtumiaji
Hello\r\n\r\nI am electronic engineer and PCB designer.\r\n\r\nI am able to complete your task, please tell what CAD you prefer\r\n\r\nAnd another question\r\nyou said \r\n\"Want I expect from this job is the schematics and the BOM \" \r\nand \r\n\"The board must be turned ON via a message on the CAN protocoll\"\r\nbut this task could be solved by STM32 CAN interrupt, and there is no need for any additional hardware circuits\r\n\r\nAlso I am able to provide you a PCB layout if you need\r\n\r\nAnyway we can discuss any moments and I believe in our good cooperation\r\n\r\nRegards
€305 EUR ndani ya siku 14
4.9 (212 hakiki)
7.6
7.6
18 wafanyakazi huru wana zabuni kwa wastani €1,016 EUR kwa kazi hii
Picha ya Mtumiaji
......................................................................................................................................................................................................
€1,250 EUR ndani ya siku 20
4.8 (90 hakiki)
7.6
7.6
Picha ya Mtumiaji
Hello As a professional electrical engineer with more than 7 years of experience I am so confident to complete your project successfully. I have rich experience in CAN protocol and STM32F family MCU. I developed several project with STM32F7xx family using Keil vision or IAR workbench software tools a few months ago. So I am sure that your project is the best match for my skills and experience. If you are interested in working with me please feel free to contact me to discuss the project in more depth. Thank you. Best regards. Alexander
€1,000 EUR ndani ya siku 20
4.9 (26 hakiki)
7.2
7.2
Picha ya Mtumiaji
Hi, STM32 is my daily project in this last 6 years. I know both of it's firmware and hardware part. I know how to make to work well. And I familiar with most of its peripheral(ADC,DAC,DMA,FSMC/FMC,GPIO,EXTI, SPI,I2C,UART,etc). I have use STM32 for various kind of project from hobbyst, Robotic, Industrial,IoT, and military purpose. Currently I use System Workbench for IDE, Gcc-arm-none-eabi as compiller, and STM32CubeMX as project generator. I am Professional PCB designer and Firmware proggrammer. For PCB design, I will use Either EAGLE/KICAD. Let me know the detail, lets discuss it over messenger. Best Regards, Rijal
€1,000 EUR ndani ya siku 20
4.6 (84 hakiki)
6.6
6.6
Picha ya Mtumiaji
Hello , How are you ? hope all is fine! I have worked lots with STM32F series of MCU . I developed many application using TFT LCDs , whether LCD modules (with on board controllers) or LCD TFT palette (no controller) . I can show you samples of my previous work with STM32F on my youtube channel. And you can also see samples of my work on my portfolio. ============================================================================= I have long experience with 8-bit , 16-bit and 32-bit micro-controllers. I work with Microchip (PIC) , Atmel (AVR , SAM) , ST (STM) , TI (MSP) , Nordic (nRF52), and NXP (LPC) micro-controllers. I use KEIL IDE , Atmel Studio , Code Composer Studio and MPLABX IDE . I deliver tested , neat and well-commented code that can be reused or modified for future development. I also have long experience with PCB design. I have worked with low-speed , high-speed and power boards. I use Altium Designer and Eagle, and I deliver neat layout that conforms to your dimension constraints and the manufacturing constraints. More to be discussed once you contact me . BR, M.T.
€833 EUR ndani ya siku 7
4.8 (39 hakiki)
6.0
6.0
Picha ya Mtumiaji
We have extensive experience in the development of devices. send a description of your project. examples of work can be viewed in the profile. price and dates are approximate. We will be glad to help you.
€1,111 EUR ndani ya siku 3
5.0 (3 hakiki)
4.7
4.7
Picha ya Mtumiaji
I am an Embedded Systems Designer . I worked with TIVA C M4 programming . From the digital I/O through DAC and ADC to serial communication protocols . I have Two certifications in Embedded systems from Edx In ARM Programming . Thanks ... GOOD LUCK
€900 EUR ndani ya siku 10
4.9 (16 hakiki)
4.4
4.4
Picha ya Mtumiaji
Dear Sir, I am experience embedded system developer. I Great skills in designing low power and low profile electronic circuits. I can provide you, Schematic diagram with Gerber Files including bill of materials for your project. Best Wishes
€1,250 EUR ndani ya siku 7
4.8 (6 hakiki)
3.5
3.5
Picha ya Mtumiaji
Please check my profile.I am doing work on IoT (ESP8266, RASPBERRY, ARDUINO, LINUX BOARD) since last 4 years
€1,250 EUR ndani ya siku 20
4.9 (3 hakiki)
2.9
2.9
Picha ya Mtumiaji
Hello, I'm very skilled with schematic and PCB design and more importantly I am skilled with Cortex M microcontrollers in general. I'm familiar with most recent techologies and various types of production processes and I can optimize the schematic/PCB for cheap and reliable serial production. I can also design PCB layout and program the firmware for the board after I finish this project for you. I only need some specifications on board shape, size, connectors and power source and some minor details that we can discuss further. I will, after compleating the project design deliver you compleate schematic in Altium, including all footprints and STEP models so you can proceed to PCB design effortlessly. I assure you that I can make you schematic for good product.
€1,388 EUR ndani ya siku 30
5.0 (2 hakiki)
1.3
1.3
Picha ya Mtumiaji
I have CAN Bus experience. I can do the job I can do the job I can do the job
€1,250 EUR ndani ya siku 20
0.0 (0 hakiki)
0.0
0.0
Picha ya Mtumiaji
I'm and experienced embedded systems developer and have worked a lot with both STM32 MCUs and CAN bus. In your project I suggest to put MCU into stop mode and wake it up from an external interrupt connected to CAN receiver. I believe it is the most efficient way to save power consuption.
€1,000 EUR ndani ya siku 7
0.0 (0 hakiki)
0.0
0.0

Kuhusu mteja

Bedera ya ITALY
Melito di Napoli, Italy
5.0
2
Njia ya malipo imethibitishwa
Mwanachama tangu Apr 7, 2016

Uthibitishaji wa Mteja

Asante! Tumekutumia kiungo cha kudai mkopo wako bila malipo kwa barua pepe.
Hitilafu fulani imetokea wakati wa kutuma barua pepe yako. Tafadhali jaribu tena.
Watumiaji Waliosajiliwa Jumla ya Kazi Zilizochapishwa
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Onyesho la kukagua linapakia
Ruhusa imetolewa kwa Uwekaji wa Kijiografia.
Muda wako wa kuingia umeisha na umetoka nje. Tafadhali ingia tena.