Need to Build RTOS for custom Atmega 2560 Board
₹1500-12500 INR
Kulipwa wakati wa kujifungua
Hi,
We have a custom Atmega 2560 Micro controller board, i require a fully functional RTOS to be built to enable all the Input and output using serial commands.
Please go through the attached file for the PCB for more information,
The Firmware requires the following features
Readings from Accelerometer ADXL
Readings from LM35
Manage 12V GPIO all 6 Ports
Manage 5V GPIO All 6 Ports
Manage LED Scroller (4’x6”) Management
Auto Switch over Power Source
Readings from Device Battery Status
Readings of Solar Incoming Voltage Reading
Power Adapter Status (Online/Offline)
Device On/Off Control
Device Reset
we also have a 12v LEDs placed in matrix of 3 Horizontal X 5 Vertical
Please consider this as a reference.. this is 3 Rows(Horizontal) and 5 Columns(Vertical)
need the following presets
1st Preset - Blink entire 1st Column with the delay of 500ms, followed by 2nd,3rd, 4th, and 5th Column ....... Repeat until Off
2nd Preset - Blink all the 5X3 LEDs 2 Times with the delay of 500ms and follow the 1st Preset ....... Repeat until Off
3rd Preset- Blink 1st Row repeat the same followed by 2nd and 3rd Row, ....... Repeat until Off
4th Preset - Blink 1st Row 2 Times Row repeat the same followed by 2nd and 3rd Row, ....... Repeat until Off
5th Preset - Blink 3rd Row, followed by 2nd Row and 1st Row
6th Preset - Blink only 1st Row with the delay of 250ms for each blink and repeat with 750ms delay (Like Heart Beat)
Engineers who work in this projects must be Preferably from Bangalore or Anywhere in India only...
Kitambulisho cha Mradi: #20005249
Kuhusu mradi
11 wafanyakazi huru wanazabuni wastani wa ₹9977 kwa kazi hii
Yes buddy, an easy project to be done, i will make prototype in this budget,,,,,,,,shipping cost may be around 2000 INR,,,,u will get the best work done accompanied with brotherhood,,,,,,,,,,,,,,,,,,,,,,,
Hello Dear Employer the project you want to do, I am experienced with it. I am experienced with Arduino for 5 years and PCB designing for 3 years. Please check my portfolio you can see my previous work there. Thank y Zaidi
Hi, I have well read your project description, that is suitable for my experience in the field. I have experience with designing and implementing high level quality software drivers for AVR micro controllers and Hard Zaidi
I would like to take over this project Relevant Skills and Experience 4year experience in embedded
i am experienced embedded system engineer with hands on experience on microcontrollers. i can handle your project quite easily. Thank you
I have seven years experience in the field of embedded systems hardware and software design if you assign to me I can deliver with good quality and within the time.
i have worked on atmega for 2 years now, have built my own custom RTOS and have already interfaced most of the features you need