Create Schematic in Eagle

hi I am experienced PCB designer with more than 8 years of experience. I have seen the attached schematics and can do it pretty fast. Please review my profile to see the feedback from my previous employers Regards

Hello, We are a design team include 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +5 years experience of 3D mode (3D print, CNC and molds). We can complete this schematic within 5 hours. Our key skills are IoT, Embedded KIT, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to +20 layers PCB. Experience designing high density boards include FPGA, Flash, DDR, PCIE, SATA, Ethernet, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc. Also, we provide FAB, ASSEMBLY & TEST services. We can make any prototypes, even support mass production. We use the expertise of the following software: - Allegro/Orcad - Altium. - Eagle - Mentor Pads. - Expedition - Solidworks/ Autocad. - C/C++ - Android, IOS... We provide Service & Support even after completion of the projects,when ever necessary. Please contact me & we can discuss more. Best Regards, BK Tech

Hello, I can help you with your EagleCAD projects, I can design or modify the PCB boards and schematics with eagle software, I need more information about your projects, components, deadline and other things. I need see first each project to see if possible to me help you with it. Deliverable: - Schematic and PCB layout on eagle. - PCB 2D and 3D pictures without components. - PCB view 3D without components on SketchUp. - Add your company logo on top layer. - BOM files - Gerber Files If you have any questions feel free to ask and contact me before your order. Thank you, John.

Hi I am interested to your project. I am familiar with electronics,microcontroller as well as PCB design by Eagle. I will charge $35 to create this schematic. Will deliver within 24 hours. Thanks.

Time to complete attached schematic = 2 hrs Max. Profile : ---------- over 14 years of experience in PCB layout design. Expertise in EDA layout tools Pads & Allegro. Over 6 years of experience in Ethernet related layout designs with Electrical interface, Optical interface, PHY device, Switch, Processor, DDR, FPGA, Press-fit Backplane connectors, CPLD. Good knowledge on DFM, DFT and DFA Concepts. Exposure to Product development stages. Knowledge in High speed designs, signal integrity, EMI, EMC concepts. Sound knowledge on Component creation, Design Rule settings, Library management and Customer deliverables with documentation. Educational Background : ------------------------ Bachelor Degree in Electronics & Communication Engineering Layout tool supported : ----------------------- PADS Layout 9.5 (Basic) Pads VX2.1 standard ORCAD PCB Designer 16.6 ORCAD PCB Designer 17.2 Eagle Kicad Schematic tool supported : -------------------------- Orcad Capture 17.2 Pads Dxdesigner VX2.1 standard Eagle Kicad Services Offered : ------------------ Footprint Creation. Netlist Import, DXF Import, Place, Route ,Gerbers and TQ closure. PCB Layout Review. Minimum Required Inputs : ------------------------- A top - level functional block diagram Schematic Netlsit BOM Mechanicals Impedance Information Current Consumption on each voltage rail. Target fabrication house - capability report

Hi Sr, I can design the schematics that you need and all the PCB circuits. I work in Altium Designer that is the most powerfull software in the market. For the attached circuit, I can design the schematics in as much 2 hours. In this I will include the PCB model, 3D model and real code (Manufacturer part number and Digikey Code). I works in this way for next export to PCB and can make the process as fast as possible, because once that the schematics is made, takes more time edit each component to add these parameters. Next I will design the PCB and will give you a 3D files for you can see the end product and also check the real fit in the enclosures. I'm electronic engineer with more that 15 years of experience, you can see my jobs in my portfolio. Please any question, feel free to contact me. Best Regards Eng. Juan M Garin

Hello sir. I am an electrical engineer best in PCB design in software like eagle cad and ALTIUM. I have good experience in this field. I can help you to create your PCB in eagle cad and provide you the best outcomes. I can work in hourly base and also fixed price. You can contact me if you want the work.

Hi, I'm an Electronics and Telecommunications Engineer having more than 5 years experience in electronic circuits and PCB design. I can design your boards using Eagle or Altium. For the attached file I estimate 3 hour of design for schematic, PCB and adjustment. But I will not set hours in my hourly projects, you can set milestones at the beginning of each project and pay if you satisfied by result at the end.

Hello, This is Lawrence from Philippines. Yes, I believe I can do this and i can complete it within the day. Do you have BOMs? i can start working in symbols and footprints if not yet available. For estimated working hours, within 5 hours, I'm able to provide the schematic and the layout done. For my schedule, I can spend 20 hours in weekdays and 20 hours in weekends. Since I'm from Philippines, the hourly rate is too big for me. I can provide good quality work accurately at any price. For any questions. Please contact me anytime and I look forward to work with you. Thank you. Kind Regards, Lawrence P.S. - For your reference, please check my portfolio for previous related works.

I am Maulin from Montronics, having 10 years experience.

Hi Sir I am an Electronic Product Design Engineer freelancer with 20 years of experience in Electronic System Design, Firmware Development, PCB Design & PCB Manufacturing. I amproficient with a wide range of PCB/schematic Design software from Open soure till the high-end software. I can support prototype/mass production build(Low volume). Below is my education and my working experience details : - Bachelor of Engineering (B.Eng.), Electronic engineering - UPM Malaysia. 1991 - 1995 First Class - Degree - CGPA - 3.9 (Full time) - Master of Science (M.S.), . System Design Engineering - USM Malaysia. 2002 - 2003 First Class - Degree - CGPA - 3.5 (Part time) Job experience: - - Senior Electronic Engineer Infineon Technologies Sdn Bhd May 2014 - Present - Innovation Department : - Schematic/PCB/Firmware development. - Prototype build. - PCB Repair Troubleshooting.. - Senior Electronic Engineer | Celestica(M) Sdn Bhd May 2004 - May 2014 - Develop and manufacturing Aerospace Product. Electronic Engineer | - Samsung Electronics May 1998 - May 2004 - Develop schematic/PCB/ firmware for microwave. Electronic Engineer | - Resscom May 1996 - May 1998 - Develop schematic/PCB/ firmware for UPS. Services : - Schematic/Circuit design - PCB layout design - Microcontroller programming ( PIC, Atmel- Arduino, ARM,MSP430 ) - Library Creation, Symbol and Footprint - Research and Development Gerber Creation Electronic Design/ Manufactruing experience : - Recorder- system - Navigation - Black Box - Digital Radio - Microwave oven - Arduino board Shield - PLC - Arduino based system -WIFI, Bluetooth, Ethernet - Solar Panel Control Card - Bluetooth) - PIC microchip development board - Atmel development board - UPS 600 Watt and 1200 watt PCB QA qualification : - 6 Sigma - Black Belt - 6 Sigma - Green Belt - IPC-J-STD-001-CIS - IPC-A-610E CIS PCB CAD Experience : - Altium Designer - Mentor graphics PADS - Cadence Orcad/Allegro, - Eagle PCB - Kicad - Proteus VSM PCB Manufacturing software experience - Stencil Design & Gerber verification. - CAM350 - GC-Proview - Gerbtool - VisualCam Microcontroller Programming experience : - IAR - 8051, - AVR, - AVR32, - MSP430, - MicroC- 8051, PIC , ARM , PIC32 - Flowcode - AVR, PIC, ARM - Arduino - Microchip - MPLAB - Energia - MSP430 - Pinguino - Microchip

Greetings, I have read the project description and willing to work with you. We are a team of Electrical Engineers and quite experienced in PCB design and Schematics using EagleCad, Proteus, KickCAD etc. It will take 3-5 hours to complete such designs. Allow us to work with you on this ongoing project. Warmest Regards Sample Work https://www.freelancer.com/projects/electronics/led-circuit-schematic/?w=f

Hello Sir/Madam, I would like to apply for your project. I am an EE based in Bulgaria with several years of experience in schematics development and pcb design. I am using AD 17. You can check my portfolio with some of my designs. My latest ones, not included in portfolio include USB Type C hubs, Ethernet to Type C/USB 3.1 A bridge, PoE modules, etc. I am awaiting your answer to my proposal, Dimitar Mirchev

Drawing the schematic in the provided picture should take no more than a couple of hours, including library creation for the schematic. not all parts do exist in a library. Moreover, here I assume you have selected your parts in the schematic. I mean the actual parts with partnumbers and datasheet, which will be put on your board when assembled. I have professional license of pre-autodesk version of good old Eagle. drop a line over chat if you have any questions. best regards

With a big knowldge in eagle CAD, electronics' schematics and PCB design background, I can provide you a well schematic and PCB layout if you need it.

Hi sear Sir/Madam i have an Msc in electrical engineering . i gave great experiences with PCB layout. i think, 10 hour is good for this job (if information of parts is exist ) best regard

Hi, I am interested on this project and I want to share my expertise with you in this project. I am an electronics engineer and IT programmer with over 15 years of experience. I do design of embedded systems and interfaces such as microcontrollers and peripherals. I had already more than 50 projects done in embedded systems, arduino, avr, microcontroller, circuit design, microcontroller coding, database systems, website developer (Proficient in PHP, SQL, XML, HTML5, HTML, CSS, BOOTSTRAP JAVASCRIPT), web research and PCB layout. Such projects are Quadcopter(a famous flying robot that is autonomous), Wifi Scanner, Power Monitoring Systems, Manguino MCU, and many more. You can visit my profile to check similar and related projects. Thank you for taking the time to read my application and I look forward for having an interview with you.

Hello, I believe I have the skillset you are looking for and a little more. I have a masters degree in electronics, and a little over 5 years working as an Electrical Design Engineer. At my job I work with Cadence tools (OrCAD, Allegro, PSpice) but I see no difficulty in building this in Eagle for you (I learnt Eagle in College, where I still hold part time position as an industry expert). Best regrads, Emina

I have worked in pcb design in the past I have beem working in it for the past 2 years I have designed smps and Microstrip patch antenna for 2.4 gz in past