Kanuni za Ujenzi Jobs

I have a detached residential bungalow. The brief is an extension outside of bedroom 2 and bathroom to square the house up (out in line with the existing flat roof extension). Then, dormers to the front of the house (the whole way across to maximize space), and a dormer punching off the external cavity of the flat roof extension, the whole way across (again to maximize the space). Ideally, this at least two of three bedrooms can then be moved up stairs (including a master), and then we cna reconfigure the bottom to have two or three (ideally at least a 4 bedroom house) and remove some of the smaller rooms. I would like the ktichen area and lounge area to be open planned. Here is what I need from you: • Concept-level sketches that explore different massing options for the extension a...

I need a structural engineer to design an LVL beam to support the second floor and replace the existing load-bearing wall that is 24’. The wall is adjacent to the living room, kitchen, and dining room on the main floor. The area measures 24 feet long and 20 feet wide. The joists are 2x8, spaced 16 inches on centre, perpendicular to the load-bearing wall, and are 12 feet long on one side and 8 feet on the other. The roof of the second floor is framed with trusses that transfer the load to the exterior walls, so none of the interior walls on the second floor are load-bearing. The main floor is supported by joists of the same size and a steel beam in the basement, which rests on the concrete foundation at one end, a steel post in the centre, and a 4-ply 2x4 post at the other end. Re...

I need detailed architectural prints for a single family home remodel. The project involves creating a new en suite bathroom off an existing bathroom, frame in a closet next to it. Also add a shower to existing basement bathroom Requirements: - Accurate and professional drawings - Stamped by a licensed architect Ideal skills and experience: - Proficiency in architectural design software - Experience with residential bathrooms - Licensed to provide stamped drawings Please include samples of previous work and relevant credentials

I need a professional who can assist in changing the occupancy status of my commercial building from a retail store to a fitness facility. Key Requirements: - Knowledge of local building codes and regulations - Experience with commercial property modifications - Capability to oversee necessary renovations - Help with necessary permits and inspections Ideal Skills: - Commercial property management - Construction oversight - Regulatory compliance

I’m ready to turn my completed design for a 240 sq ft one-bedroom apartment into a fully permitted reality on my single-story home in St Petersburg, Pinellas County, Florida, USA. I’m looking for an architect who can take my finished layout and develop the construction plans and documents the city will accept for a rental unit. The job centres on translating my drawings into a permit set that satisfies the current Florida Building Code as well as local zoning and flood-zone regulations. Because the space will operate as a separate rental, the plans must clearly address ingress/egress, fire separation, sound attenuation, HVAC, plumbing, and dedicated electrical service. Key deliverables • Signed and sealed architectural drawings (site plan, floor plan, elevations, sec...

I need a drawings for a 15x20 detached storage structure primarily for tools and equipment. The structure should include: - carriage doors Ideal Skills and Experience: - Experience in building detached structures - Knowledge of shelving installation - Ability to ensure durability and security for storage purposes Please provide examples of similar work done.

We are looking for a Washington State (WA) licensed Architect to review and stamp a set of architectural drawings for a permit submission. The project is for a USA-based client, and the drawings are already prepared. We need a qualified architect to review for code compliance and provide an official stamp for submission to the local authority.

I own a 3,000 sq ft house and want to give it a fresh yet traditionally styled update while adding a few new spaces that improve day-to-day function. Inside, the existing layout already holds a living room, dining room, kitchen, laundry, two-and-a-half baths, a master bedroom, a second bedroom, a studio, a movie room, plus patio and garden access. I’m looking for cosmetic design tweaks across those areas—finishes, built-ins, lighting, and any clever reconfigurations that make the rooms flow better without moving major walls. Beyond the refresh, I have three additions in mind: 1. A loft positioned above the dining room, 2. A rear extension that links a new mudroom to a combined spa/gym with its own bathroom. 3. A carport that ties seamlessly into the existing façade...

Need Structural Drawings for 2nd & 3rd Floor (G+3 Building) Hello, I am looking for an experienced Structural Engineer to prepare structural drawings for the 2nd and 3rd floors of my G+3 building. The basement and first floor are already constructed, and I need proper structural design and detailing for the upper floors ensuring safety and continuity with the existing structure. Project Details: • Building Type: Residential/Commercial (Mixed use) • Status: Basement + Ground + 1st Floor completed • Requirement: Structural design for 2nd & 3rd Floor • Architectural layout is available (DWG/PDF) Scope of Work: • Column layout continuation and load analysis • Beam and slab structural design • Reinforcement detailing (RCC drawings) • ...

We are a growing home improvement and repair company based in North Dublin. We specialize in residential renovations, extensions, and high-quality repairs. We are seeking a detail-oriented Estimator to join our team. This role is unique: you won’t just be crunching numbers; you will be the bridge between our projects and our local supply chain, ensuring we have the right materials at the right price. Key Responsibilities: Accurate Estimating: Perform detailed material take-offs and labor estimates from architectural drawings or site notes. Local Material Sourcing: Research and source construction materials from suppliers across North Dublin and the surrounding areas. You will be responsible for comparing prices to ensure project profitability. Supplier Coordination: Maintain rela...

I’m looking for a licensed structural engineer to review a single-family residential project and issue a formal verification letter that I can submit to my local building department and lender. The house is already framed and dried-in; what I still need is professional confirmation that the foundation, framing, and roof structure all meet current code requirements and were built in accordance with the approved plans. Here’s what I need from you: • A brief site or plan review of the foundation, framing, and roof structure (whichever you prefer—on-site visit or detailed plan analysis, depending on your state’s rules). • A signed and sealed letter, on your professional letterhead, clearly stating that these three elements are structurally sound and compl...

I need a licensed civil / structural engineer who can quickly prepare two documents for a small ground-floor shop (8 ft × 14 ft, roughly 10.4 m²) in Delhi 110042. The space is already built and in good condition, but I have no existing drawings, so both items will have to be created from scratch and stamped for government use. The first deliverable is a Structure Safety Certificate that satisfies the Municipal Corporation of Delhi’s requirements. The second is a simple site plan, again in line with Delhi-specific codes, showing the shop’s footprint and surrounding plot as required for my MCD trade licence application. I will supply on-site photos, measurements and any other details you request. What I need back is: • A signed, sealed PDF of the safety certifi...

I’m at the pre-application stage for a single-dwelling new build and want the submission package to go in first time without avoidable questions from the local authority. My immediate need is full planning application preparation that respects current UK planning law, national policy and the specific LPA’s design guides. The scope centres on two deliverables: • Architectural drawings – Site Location Plan, Existing Site Plan, Proposed Site Plan, Proposed Floor & Roof Plans, Proposed Elevations and Proposed Sections in a format acceptable to the council’s online portal, ready for any minor tweaks the planning officer may request. • Planning statement – a clearly structured document that sets out policy compliance, design rationale, access arran...

I need detailed scaffold plans for a 1-2 story residential building. The scaffold is specifically for roof access and repairs. also paint to walls. Also Scaffold design over 1st Floor roof areas to access top floor roof, Ceramic Tile Roof Possible Aluminium Scaffold Required. Scaffold levels every 2 vertical metres At least 1xstair Access and 1xLadder Access 2X2ton Load Limit Loading Bays 2.4m² Design for Masonry Ties into Building Unimesh Type Containment. Requirements: - Structural integrity and safety compliance - Clear access routes and load-bearing specifications - Detailed diagrams and material lists - Experience in residential scaffold design Ideal Skills: - Background in construction or civil engineering - Familiarity with local building codes and regulations

I am looking for a full-time Civil Estimator / Tenderer who can own the entire bid process for our New South Wales projects. Your background should cover the full spectrum of civil construction—roadworks, drainage, pavements and everything in between—because the tenders you will prepare range from local-council packages to larger TfNSW contracts. What you will handle day-to-day • Interpreting drawings, AUS-SPEC notes and TfNSW specifications, then translating them into clear BOQ take-offs and sharp pricing. • Writing concise construction methodologies that set us apart, backed by a detailed MS Project program. • Completing every return schedule so the submission is genuinely “turn-key” and ready for upload. I generally work with Micro...

I need an impact sound test for a hard floor installation in an apartment. This is required for compliance with strata/ISO standards. Key requirements: - Conduct impact sound test - Adhere to ISO standards - Provide detailed report on findings - Experience with acoustic testing and ISO compliance Ideal skills and experience: - Acoustic engineering background - Familiarity with ISO standards - Previous experience in impact sound testing - Strong analytical and reporting skills The apartment is 70 sq m, second floor of a three storey strata building, in Kensington NSW. Please state your quote in your bids. Thank you.

Hi I will share the details with the shortlisted candidates. thanks

I'm looking for a skilled designer or architect to renovate my vacation villa in the U.S. Virgin Islands. The primary goal of this project is to increase functionality throughout the property. Areas to be renovated include: - Living Areas - Bedrooms - Kitchen and Bathrooms - Garden and Pool Ideal skills and experience: - Proven experience in residential renovation - Strong portfolio showcasing functional design solutions - Knowledge of local building codes and regulations - Ability to work within a budget and timeline Please include examples of previous work and a rough estimate of costs.

I want to build a wooden shed as a dedicated place to store all my garden tools and equipment. I'll want blueprints based on my measurements, suggested material list that will stand up to weather, a solid frame off the existing garage block wall, adding cladding and roofing that tie in cleanly, hanging secure double doors, and finishing the inside with fixed shelving units and sturdy tool racks so everything has its place. Because the shed’s purpose is purely storage, function and longevity matter most. I need proper flashing where it meets the garage, pressure-treated timber or an equivalent weather-resistant option. Leave the exterior in a natural stain that matches the garage trim; no bright paints. Please see the attached outline and photos showing ideas exterior and door...

I need a licensed architect or engineer to create a zoning clearance floor plan for a commercial retail store. Requirements: - Detailed floor plan - Experience with commercial retail store layouts Ideal Skills & Experience: - Licensed architecture or engineering - Expertise in zoning and building regulations Please provide relevant work samples and ensure familiarity with local codes.

Hi I will share the details with the shortlisted candidates. thanks

I need a qualified structural engineer to recreate the full pile logs of 27 piles & pile calculation package for the pile foundations of a UK commercial building. We no longer have any original logs: the original pile company owner has left the country , so the job starts from a clean slate: reviewing the drawings and available site investigation data, determining appropriate pile capacities, and documenting every step in a format acceptable to Building Control and any checking engineer. Because the aim is regulatory compliance, the calculations must align with Eurocode 7 and the latest UK National Annexes—including partial-factor verification, negative skin friction checks, settlement assessments and group interaction where relevant. I will supply drawings, load take-downs and...

We are a growing home improvement and repair company based in North Dublin. We specialize in residential renovations, extensions, and high-quality repairs. We are seeking a detail-oriented Estimator to join our team. This role is unique: you won’t just be crunching numbers; you will be the bridge between our projects and our local supply chain, ensuring we have the right materials at the right price. Key Responsibilities: Accurate Estimating: Perform detailed material take-offs and labor estimates from architectural drawings or site notes. Local Material Sourcing: Research and source construction materials from suppliers across North Dublin and the surrounding areas. You will be responsible for comparing prices to ensure project profitability. Supplier Coordination: Maintain rela...

Candidate Requirements: Chartered status (CEng) and membership of a recognised body (e.g. MIFireE) Demonstrable experience with: HRB projects Retrospective compliance / regularisation Fire strategy review and certification processes Ability to provide verifiable credentials and relevant project references Professional indemnity insurance (confirmation required) Desirable (not essential): Experience working with Wandsworth and/or Richmond Borough Council Building Control Deliverables: Written compliance assessment report Detailed remedial works schedule (if required) Ongoing support through to final sign-off Re-inspection(s) post-remedial works as necessary Additional Information: The objective is to bring the project to a fully compliant and ...