I graduated from Moscow Technical University with Master degree. I have rich and strong experience in
MECHANICAL
- 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks
- Finite Element Analysis and CFD using ANSYS and ABAQUS
- Numerical Calculation and Simulation using Matlab
- Dynamics Analysis using...zaidi
I graduated from Moscow Technical University with Master degree. I have rich and strong experience in
MECHANICAL
- 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks
- Finite Element Analysis and CFD using ANSYS and ABAQUS
- Numerical Calculation and Simulation using Matlab
- Dynamics Analysis using Adams, Nastran, Patran
HARDWARE
- Schematic Digital, Analog, Power electronics.
- PCB layout, routing and assembly using altium designer or Eagle CAD, Allegro.
- Product design and mechanical design in Solidworks.
INDUSTRIAL
- Power supplies (AC/DC/AC) and Electric Drives (240/480VAC) using SMPS
- CVCF, DC-DC Converter, Inverter and Rectifier.
- Bio-metric device such as Fingerprint identification system
- Glucose Monitoring device development.
- IPS system using UWB bandkidogo
I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language.
I have done
- Control of DC motor, Display on LCD and input from Hexpad
- RFID Based Factory...zaidi
I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language.
I have done
- Control of DC motor, Display on LCD and input from Hexpad
- RFID Based Factory Automation and Remote Inventory Management.
- RFID Based Loyal Card for Loyal Customers.
- Bluetooth Communication between MCU and RFID Host.
- Vehicle Tracking using GPS and Accelerometer.
and a lot more.
I have expertise over all communication protocols of Microcontroller:
- SPI (Master/Slave)
- UART
- USART
- I2C (Master/Slave).
- Ethernet
- Wifi
- Bluetooth etc..
I am expert in interfacing sensor modules with microcontroller.
I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status.
Service Description:
* Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc)
* LED lighting control
* DC Motor Control and Actuator Control Solutions
* Touch Sense
* RF Energy Detection Systems
* Home Automation systems
* Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing)
* GPS Tracking Systems
* USB Based Embedded Products
* Power Over Ethernet (POE) Solution
* On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications
-----------------------------------------------------
* PCB Design (Printed Circuit Board)
* Schematics and Bill of Material
* Block Diagram and Design Documentation
* Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process.
* Part Selection, Parts Sourcing
* Manufacturing File generation
* High Speed, High Density Multi-Layer PCB Layout
* Embedded Software / Firmware design development
* 3D Step Models of the PCB for Integration with MCAD tools.
* Board Bring-up: Test codes in C/C++.
* DSP Design (Digital Signal Processing)
* Power / Signal Integrity Analysis
* System / Hardware Design
--------------------------------
* Circuit Simulation Training using Altium, MultiSim and Proteus
* Embedded Firmware Design Training (C/C++, Assembly)
* Schematics and PCB Design trainingkidogo
Thanks for visiting my profile.
I'm an experienced software developer with a lot of knowledge and ideas about how to do a perfect application.
I am a Full stack Web Developer with 6+ years of experience working on the website. I have experiences in Web and developed many websites.
Also I am Senior Mobile Developer...zaidi
Thanks for visiting my profile.
I'm an experienced software developer with a lot of knowledge and ideas about how to do a perfect application.
I am a Full stack Web Developer with 6+ years of experience working on the website. I have experiences in Web and developed many websites.
Also I am Senior Mobile Developer with Native App development and Hybrid App development.
Also Senior Software Developer with Artificial Intelligence, Machine Learning, Image Processing...
I have developed the various websites and app such as social networking , dating , delivery, e-commerce, CRM system, Video Streaming, RealtimeApplication, etc.
Also I developed many software with Open CV, Device control programming, Image processing...
My Key Skills
⭐ PHP/NODE.js
⭐ Laravel, CI, Yii and any PHP framework
⭐ Angular, React/Mean, Mearn
⭐ My SQL, Mongo DB
⭐ Android/ios native App
⭐ IONIC/ReactNative Hybrid App
⭐ STM32 Control Program
⭐ OpenCV
⭐ ...
⭐ ...
⭐ ...kidogo
***********************QUALITY - ON TIME ************************
We are a design team with 3 groups: System Design, Layout PCB & Mechanical.
We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +7 years experience of 3D Design (3D printing, CNC and Mould).
Our key...zaidi
***********************QUALITY - ON TIME ************************
We are a design team with 3 groups: System Design, Layout PCB & Mechanical.
We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +7 years experience of 3D Design (3D printing, CNC and Mould).
Our key skills are IoT, Embedded, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to +24 layers PCB.
Experience designing high density boards include FPGA, EMCC, DDR, PCIE, SATA, ETH, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc.
Also, we provide programming for MCU, FAB, ASSEMBLY & TESTING services.
We can make any prototypes, even support mass production.
We use the expertise of the following software:
- Allegro/Orcad
- Altium.
- Eagle
- Mentor Pads.
- Expedition
- Solidworks/ Autocad.
- C/C++
- Android, IOS...
We provide Service & Support even after completion of the projects.
"We are ready to give you the best"
**********Best regards*******kidogo
⭐ ⭐ ⭐ ⭐ ⭐
As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years.
Here are some of the experiences that I worked ago.
- Exceptional C++/C /C# programming skills.
- Strong foundation in simulation MATLAB
- FPGA design using Verilog/VHDL (Xilinx...zaidi
⭐ ⭐ ⭐ ⭐ ⭐
As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years.
Here are some of the experiences that I worked ago.
- Exceptional C++/C /C# programming skills.
- Strong foundation in simulation MATLAB
- FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube)
- ARM, DSP, MCUs, Arduino experience.
- Arm cores: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP
- MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251
- Single board computer: Raspbery pi, Beaglebone, NanoPi
- Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee.
- Especially full experience for BLE
And here are some of tools that I normally use, but not limited to:
- Altium Designer, Cadsoft Eagle, Cadence Allegro, OrCAD, Ansoft, ADS, HFSS, MATLAB, Quartus II, CCS, Micro C, etc.
Once you hire me, expected me to help your business like I 'm growing it as my own.
I would love to hear from you.kidogo
****I am 3D modeler&Architect& product designer!!!
I have experience to design and model house buildings by 3DS MAX, Sketchup, Autodesk Revit, Archicad, AutoCad, Chief Architect X9 and Lumion.
I am using Solidworks, Creo, 3Ds max and Maya too to model some modeling.
I have experience to design IC engines, Gas...zaidi
****I am 3D modeler&Architect& product designer!!!
I have experience to design and model house buildings by 3DS MAX, Sketchup, Autodesk Revit, Archicad, AutoCad, Chief Architect X9 and Lumion.
I am using Solidworks, Creo, 3Ds max and Maya too to model some modeling.
I have experience to design IC engines, Gas Turbine engines and various type jewelry ring using Solidworks , 3Ds max and maya, CATIA and Autocad.
****I am mechanical engineer(CFD/FEA)!!!!
And I have experience to simulate CFD and strength analysis of IC Engine and Gas turbine engine using Ansys, Star CCM, and comsol.
Especially, IC Engine modeling and combustion simulation and dynamical simulation and structure strength calculation.
*** I am program developer.
I have experience to develop many programs using matlab and c++.
Especially, marine propeller optimal design program, boundary detection program of diatom, image autocrop program, etc.
kidogo
I specialize in software development for embedded device and web applications.
personal site: https://daviduche.com
Embedded Software development:
- C / C++ ,
- Python,
- ARM CORTEX M-family Programming (C / C++ ),
- Arduino and Arduino compatible systems firmware development,
- Raspberry Pi
Web...zaidi
I specialize in software development for embedded device and web applications.
personal site: https://daviduche.com
Embedded Software development:
- C / C++ ,
- Python,
- ARM CORTEX M-family Programming (C / C++ ),
- Arduino and Arduino compatible systems firmware development,
- Raspberry Pi
Web Development:
- Django
- Flask
- Knockout.jskidogo
Welcome to my profile page!
Im Analuz, Venezuelan i have 3 years of experience Im apassionate about my career in all its aspect, i like a clean design with a purpose and its functionality. My top skills are efficiency, creativity, detail and i listen carefully to my client and to get what you need.
I have...zaidi
Welcome to my profile page!
Im Analuz, Venezuelan i have 3 years of experience Im apassionate about my career in all its aspect, i like a clean design with a purpose and its functionality. My top skills are efficiency, creativity, detail and i listen carefully to my client and to get what you need.
I have experience in branding from logotype to the stationary design and social network, also i have skills in editorial cover book and organizing information and i love design infographic. For last is my passion edite videos from just images to illustration and animation.
My aspiration is to be better in my career!
My Sevices:
Logo design
Designing Banners/Headers
Banner ads/photoshop Editing
Background Remove
Photo retouching,remove,crop resize.
Vectors
Infographic
Cover Book
Labels
Wordpress
Wix Website
Feel free to contact me anytime.
Cheers!kidogo
Greetings أهلا بك أخي
my name is Mohammad
I’m a Professional Mechanical/Mechatronics Arab engineer working in the industrial, manufacturing and managerial field of automation for more than 4 years now.
--- My skills include:
* Professional Mechanical Design Engineering.
* Excellent 3D modeling and FEA...zaidi
Greetings أهلا بك أخي
my name is Mohammad
I’m a Professional Mechanical/Mechatronics Arab engineer working in the industrial, manufacturing and managerial field of automation for more than 4 years now.
--- My skills include:
* Professional Mechanical Design Engineering.
* Excellent 3D modeling and FEA simulations.
* Electronics/PCB Designer, proficient in Proteus, Multisim, Ki-Cad, and Logisim.
* Translation from and to English and Arabic.
* Video Translation, transcription and Captioning.
*video production & montage.
*writing arabic stories & revise arabic grammar for any written thing.
--- Why hire me ??
1- High quality work in a timely manner.
2- professional work completed in less time than the average.
3- I provide any number of revisions.
4- provide out of the box solutions for problems
feel free to check out my portfolio and contact me if you need any relevant work.
Thank you for taking the time to review my profile, I'm looking forward to working with you.kidogo
Jambo , hawa hapa wafanyakazi huru ambao hawako mtandaoni
Jambo , hawa hapa wafanyakazi huru ambao hawako mtandaoni wanaolingana na ""
Iliyodhaminiwa:
Onekana juu ya ukurasa huu kwa ujuzi huu, kwa siku 7! Ni 10 tu kati yenu mnaoweza kujidhamini, na ni watatu mtakaoonekana kwa wakati mmoja.
Onyesha:
Fanya profaili yako iwe tofauti kwa ujuzi huu, kwa kuonyesha, na uonekane na waajiri!
I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using...I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using Adams, Nastran, Patran HARDWARE - Schematic Digital, Analog, Power electronics. - PCB layout, routing and assembly using altium designer or Eagle CAD, Allegro. - Product design and mechanical design in Solidworks. INDUSTRIAL - Power supplies (AC/DC/AC) and Electric Drives (240/480VAC) using SMPS - CVCF, DC-DC Converter, Inverter and Rectifier. - Bio-metric device such as Fingerprint identification system - Glucose Monitoring device development. - IPS system using UWB band kidogo
I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory...I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Automation and Remote Inventory Management. - RFID Based Loyal Card for Loyal Customers. - Bluetooth Communication between MCU and RFID Host. - Vehicle Tracking using GPS and Accelerometer. and a lot more. I have expertise over all communication protocols of Microcontroller: - SPI (Master/Slave) - UART - USART - I2C (Master/Slave). - Ethernet - Wifi - Bluetooth etc.. I am expert in interfacing sensor modules with microcontroller. I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status. Service Description: * Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc) * LED lighting control * DC Motor Control and Actuator Control Solutions * Touch Sense * RF Energy Detection Systems * Home Automation systems * Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing) * GPS Tracking Systems * USB Based Embedded Products * Power Over Ethernet (POE) Solution * On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications ----------------------------------------------------- * PCB Design (Printed Circuit Board) * Schematics and Bill of Material * Block Diagram and Design Documentation * Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process. * Part Selection, Parts Sourcing * Manufacturing File generation * High Speed, High Density Multi-Layer PCB Layout * Embedded Software / Firmware design development * 3D Step Models of the PCB for Integration with MCAD tools. * Board Bring-up: Test codes in C/C++. * DSP Design (Digital Signal Processing) * Power / Signal Integrity Analysis * System / Hardware Design -------------------------------- * Circuit Simulation Training using Altium, MultiSim and Proteus * Embedded Firmware Design Training (C/C++, Assembly) * Schematics and PCB Design training kidogo
Thanks for visiting my profile. I'm an experienced software developer with a lot of knowledge and ideas about how to do a perfect application. I am a Full stack Web Developer with 6+ years of experience working on the website. I have experiences in Web and developed many websites. Also I am Senior Mobile Developer...Thanks for visiting my profile. I'm an experienced software developer with a lot of knowledge and ideas about how to do a perfect application. I am a Full stack Web Developer with 6+ years of experience working on the website. I have experiences in Web and developed many websites. Also I am Senior Mobile Developer with Native App development and Hybrid App development. Also Senior Software Developer with Artificial Intelligence, Machine Learning, Image Processing... I have developed the various websites and app such as social networking , dating , delivery, e-commerce, CRM system, Video Streaming, RealtimeApplication, etc. Also I developed many software with Open CV, Device control programming, Image processing... My Key Skills ⭐ PHP/NODE.js ⭐ Laravel, CI, Yii and any PHP framework ⭐ Angular, React/Mean, Mearn ⭐ My SQL, Mongo DB ⭐ Android/ios native App ⭐ IONIC/ReactNative Hybrid App ⭐ STM32 Control Program ⭐ OpenCV ⭐ ... ⭐ ... ⭐ ... kidogo
***********************QUALITY - ON TIME ************************ We are a design team with 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +7 years experience of 3D Design (3D printing, CNC and Mould). Our key...***********************QUALITY - ON TIME ************************ We are a design team with 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +7 years experience of 3D Design (3D printing, CNC and Mould). Our key skills are IoT, Embedded, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to +24 layers PCB. Experience designing high density boards include FPGA, EMCC, DDR, PCIE, SATA, ETH, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc. Also, we provide programming for MCU, FAB, ASSEMBLY & TESTING services. We can make any prototypes, even support mass production. We use the expertise of the following software: - Allegro/Orcad - Altium. - Eagle - Mentor Pads. - Expedition - Solidworks/ Autocad. - C/C++ - Android, IOS... We provide Service & Support even after completion of the projects. "We are ready to give you the best" **********Best regards******* kidogo
⭐ ⭐ ⭐ ⭐ ⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Exceptional C++/C /C# programming skills. - Strong foundation in simulation MATLAB - FPGA design using Verilog/VHDL (Xilinx...⭐ ⭐ ⭐ ⭐ ⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Exceptional C++/C /C# programming skills. - Strong foundation in simulation MATLAB - FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube) - ARM, DSP, MCUs, Arduino experience. - Arm cores: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board computer: Raspbery pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full experience for BLE And here are some of tools that I normally use, but not limited to: - Altium Designer, Cadsoft Eagle, Cadence Allegro, OrCAD, Ansoft, ADS, HFSS, MATLAB, Quartus II, CCS, Micro C, etc. Once you hire me, expected me to help your business like I 'm growing it as my own. I would love to hear from you. kidogo
****I am 3D modeler&Architect& product designer!!! I have experience to design and model house buildings by 3DS MAX, Sketchup, Autodesk Revit, Archicad, AutoCad, Chief Architect X9 and Lumion. I am using Solidworks, Creo, 3Ds max and Maya too to model some modeling. I have experience to design IC engines, Gas...****I am 3D modeler&Architect& product designer!!! I have experience to design and model house buildings by 3DS MAX, Sketchup, Autodesk Revit, Archicad, AutoCad, Chief Architect X9 and Lumion. I am using Solidworks, Creo, 3Ds max and Maya too to model some modeling. I have experience to design IC engines, Gas Turbine engines and various type jewelry ring using Solidworks , 3Ds max and maya, CATIA and Autocad. ****I am mechanical engineer(CFD/FEA)!!!! And I have experience to simulate CFD and strength analysis of IC Engine and Gas turbine engine using Ansys, Star CCM, and comsol. Especially, IC Engine modeling and combustion simulation and dynamical simulation and structure strength calculation. *** I am program developer. I have experience to develop many programs using matlab and c++. Especially, marine propeller optimal design program, boundary detection program of diatom, image autocrop program, etc. kidogo
I specialize in software development for embedded device and web applications. personal site: https://daviduche.com Embedded Software development: - C / C++ , - Python, - ARM CORTEX M-family Programming (C / C++ ), - Arduino and Arduino compatible systems firmware development, - Raspberry Pi Web...I specialize in software development for embedded device and web applications. personal site: https://daviduche.com Embedded Software development: - C / C++ , - Python, - ARM CORTEX M-family Programming (C / C++ ), - Arduino and Arduino compatible systems firmware development, - Raspberry Pi Web Development: - Django - Flask - Knockout.js kidogo
Expert 2D CAD engineer, 3D modeller, sketch artist & illustrator with 8years of experience. My services: - 2D CAD Drawings/Fabrication drawings/Section details/Isometric views - Technical drawings/Datasheets/Schematics/Exploded diagrams - Concept sketches/Illustrations/Instruction manuals/Flip-books/Comic designs -...Expert 2D CAD engineer, 3D modeller, sketch artist & illustrator with 8years of experience. My services: - 2D CAD Drawings/Fabrication drawings/Section details/Isometric views - Technical drawings/Datasheets/Schematics/Exploded diagrams - Concept sketches/Illustrations/Instruction manuals/Flip-books/Comic designs - Layout plans/Floor plans/Site plans/Mapping/Elevations - 3D Modelling/Rendering - Estimation & Costing work/BOQ preparation - Photoshop/Photo editing/ Photo retouching - Vectorisation/Presentations/Data Entry Software skills: AutoCAD, Inventor, SolidWorks, CATIA, 3Ds max, Maya, VRay, MRay, Zbrush, Keyshot, SoftPlan, illustrator, Photoshop, MS Office & Acrobat pro . Revisions offered: As per individual project conditions. Replies within: Less than 15 minutes kidogo
Welcome to my profile page! Im Analuz, Venezuelan i have 3 years of experience Im apassionate about my career in all its aspect, i like a clean design with a purpose and its functionality. My top skills are efficiency, creativity, detail and i listen carefully to my client and to get what you need. I have...Welcome to my profile page! Im Analuz, Venezuelan i have 3 years of experience Im apassionate about my career in all its aspect, i like a clean design with a purpose and its functionality. My top skills are efficiency, creativity, detail and i listen carefully to my client and to get what you need. I have experience in branding from logotype to the stationary design and social network, also i have skills in editorial cover book and organizing information and i love design infographic. For last is my passion edite videos from just images to illustration and animation. My aspiration is to be better in my career! My Sevices: Logo design Designing Banners/Headers Banner ads/photoshop Editing Background Remove Photo retouching,remove,crop resize. Vectors Infographic Cover Book Labels Wordpress Wix Website Feel free to contact me anytime. Cheers! kidogo
Greetings أهلا بك أخي my name is Mohammad I’m a Professional Mechanical/Mechatronics Arab engineer working in the industrial, manufacturing and managerial field of automation for more than 4 years now. --- My skills include: * Professional Mechanical Design Engineering. * Excellent 3D modeling and FEA...Greetings أهلا بك أخي my name is Mohammad I’m a Professional Mechanical/Mechatronics Arab engineer working in the industrial, manufacturing and managerial field of automation for more than 4 years now. --- My skills include: * Professional Mechanical Design Engineering. * Excellent 3D modeling and FEA simulations. * Electronics/PCB Designer, proficient in Proteus, Multisim, Ki-Cad, and Logisim. * Translation from and to English and Arabic. * Video Translation, transcription and Captioning. *video production & montage. *writing arabic stories & revise arabic grammar for any written thing. --- Why hire me ?? 1- High quality work in a timely manner. 2- professional work completed in less time than the average. 3- I provide any number of revisions. 4- provide out of the box solutions for problems feel free to check out my portfolio and contact me if you need any relevant work. Thank you for taking the time to review my profile, I'm looking forward to working with you. kidogo
